You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Hi all,
Just trying to understand the hearth regulations for a wood burning stove.
Most stoves we have looked at are advertised as only needing a 12mm hearth. However, on closer inspection of the regs, it seems this is only for freestanding stoves, not those in a recess / fireplace. Unless I've read it wrong, then it's quite surprising as I'm sure many stoves are in a recess i.e. a fireplace.
Our fireplace seems unusual as the constructional hearth under the fireplace goes straight down in line with the recess and doesn't project into the room at all. Not sure if a 12mm hearth is therefore permitted.
Confused.
iirc the stove requirements superseded/over rule the building regs. basically some stoves radiate much heat down, so only need ember protection and not a constructional hearth.
I’m not so sure about that.
Gas boiler manufacturers instructions can overrule building regs but my understanding of solid fuel is that you take whichever is the most rigorous to comply with. Unless it has changed that used to be the case.
Look at the approved document j for guidance.
+1 part j has load of good diagrams. Also some rough rules on stove fitter manual.