Stoves on a 12mm He...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Stoves on a 12mm Hearth

10 Posts
6 Users
0 Reactions
87 Views
Posts: 827
Free Member
Topic starter
 

Morning people,

I'm currently in the midst of picking a stove to be installed in our conservatory. As there is no constructional hearth in there I assume I'm limited to a 12mm hearth?

Can anyone recommend a stove that's suitable for a 12mm hearth? I'm finding it hard to single out these stoves from the rest. Must also be DEFRA approved.

Out conservatory is approx 20ft long by 12ft wide. It's 3 meters tall and colder than the arctic in the winter. The higher the output the better.

Thanks


 
Posted : 24/09/2015 8:19 am
Posts: 1143
Full Member
 

Out of interest as we've been thinking of putting a stove in our conservatory, why are you limited to a 12mm hearth? Can't you just stick something thicker down?


 
Posted : 24/09/2015 9:35 am
Posts: 827
Free Member
Topic starter
 

I might be wrong. I really need to ask an expert but its near impossible to speak to someone! I've left messages and emails with 4 different people and not one has come back to me...

I was thinking the extra weight of a big thick hearth and the stove would be too much for a non constructional floor area? We could pull up the floorboards and fill it up with concrete but that sounds expensive and difficult.


 
Posted : 24/09/2015 9:53 am
Posts: 13594
Free Member
 

Try phoning Building Control?

Given you could put a Grand Piano in there, I can't see an issue with a 20mm hearth....


 
Posted : 24/09/2015 10:28 am
Posts: 827
Free Member
Topic starter
 

I'm sure a 20mm one would be fine.

Regulations say that the hearth must be 250mm thick though


 
Posted : 24/09/2015 10:43 am
Posts: 1143
Full Member
 

I was thinking the extra weight of a big thick hearth and the stove would be too much for a non constructional floor area? We could pull up the floorboards and fill it up with concrete ...

Thanks for the explanation. We've got tiles on a concrete floor so should be OK.


 
Posted : 24/09/2015 10:49 am
Posts: 0
Free Member
 

The stove will need a hearth exemption certificate.
It's the heat NOT the weight that's the problem.


 
Posted : 24/09/2015 4:16 pm
Posts: 0
Free Member
 

You need to look for stoves that are rated to heat the hearth to 100 degrees or less.

There is a term you need to search for, which I've unfortunately forgotten, to find the right stove. I didn't know this first time round & ended up with a very basic one as it was the only one I could find with the right rating (Stovax Stockton 5 ML). It burned through wood at an alarming rate!
In the new house we took advice & discovered there were loads of others. This time I've got a Morso 04, which is much better.


 
Posted : 24/09/2015 4:45 pm
Posts: 827
Free Member
Topic starter
 

Thanks all.

Well I've spent ALL day searching the internet and finally narrowed it down to one of these Ekol stoves.

http://www.defrastoves.com

Seem to get reasonably good reviews and tick all the boxes - 12mm hearth, Defra etc. Local supplier and installer not too far from me either so might pop down for a chat tomorrow.

Either the Ekol Clarity or the Ekol Crystal. Both come in 5 / 8 / 12KW. One is Cast Iron and the other Steel / Cast iron door.

Would I be right in thinking that the higher the KW rating the quicker i'd be going through wood?


 
Posted : 24/09/2015 5:13 pm
Posts: 0
Free Member
 

Might be able to help you here .. I've got a Brosley Serrano 7 Multi Fuel stove 7Kw about to go on Ebay - Hardly used more less as new, in Cheshire. According to Defra its on [url= http://smokecontrol.defra.gov.uk/appliances.php?country=e ]their list [/url]as approved. Shout if you want some pictures - email in profile.


 
Posted : 24/09/2015 6:04 pm
Posts: 827
Free Member
Topic starter
 

Thanks Paul, just sent you an email


 
Posted : 24/09/2015 6:34 pm

6 DAYS LEFT
We are currently at 95% of our target!