Raspberry Pi 2 - Qu...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Raspberry Pi 2 - Quad core

60 Posts
31 Users
0 Reactions
137 Views
Posts: 1646
Full Member
Topic starter
 

Just spotted this >>

http://www.theregister.co.uk/2015/02/02/raspberry_pi_model_2/

In summary quad core 1Gb of RAM Raspberry Pi2, same size/shape as the B+ and the same price, bargain for a cheap desktop machine.


 
Posted : 02/02/2015 8:54 am
Posts: 1454
Full Member
 

Interesting. People have been asking for this for some time but they've always maintained that they weren't going to put out anything much more powerful as it was an educational tool.

Perhaps, given that they've got their camera modules now, they wanted a bit more power to allow some more interesting computer vision tasks.

Also, with that spec it is capable enough to act as a real XBMC box (Yes I know you could do it with a B+ but it was sluggish).


 
Posted : 02/02/2015 9:01 am
Posts: 12865
Free Member
 

Wow, they kept that a bit quiet! Hopefully it'll run XBMC/Kodi flawlessly although I'll wait for confirmation before getting one. Could easily be the best/cheapest media centre solution with that extra power & memory.


 
Posted : 02/02/2015 10:10 am
Posts: 1454
Full Member
 

Also, [url= http://dev.windows.com/en-us/featured/raspberrypi2support ]runs Windows 10[/url].


 
Posted : 02/02/2015 10:11 am
Posts: 0
Free Member
 

What resolution will the Pi 2 allow for? I've got a W8.1 tablet that I had planned to use as a media PC but it's rather limited by the screen resolution (to HDMI) being only 800pixels height as a maximum.


 
Posted : 02/02/2015 11:29 am
Posts: 12865
Free Member
 

1080P (same as the original)


 
Posted : 02/02/2015 11:44 am
 cp
Posts: 8928
Full Member
 

interesting! My newly ordered b+ will be going back to amazon... just ordered the new one from RS. Wondered whether this would happen as the b+ is going cheap.


 
Posted : 02/02/2015 12:00 pm
Posts: 77347
Free Member
 

Bloody typical, right after I bought a B+.


 
Posted : 02/02/2015 12:01 pm
Posts: 0
Free Member
 

In moron terms, what are they good for? I hear a lot about them but never really pay much attention because the lingo gets a bit out of my depth. I'd like to know more and learn but don't know where to start.


 
Posted : 02/02/2015 12:07 pm
Posts: 0
Free Member
 

I might be off the mark but as I'm reading it, you could use this (with Windows 10 which will be free) to act as a media PC for well under £50 by my reckoning...


 
Posted : 02/02/2015 12:09 pm
Posts: 0
Free Member
 

Windows 10 support is the most interesting bit, and Microsoft have been involved in supporting it. Will obviously be an ARM version, so either the same as the phone / phablet version or what they replace RT with. Though it may be then same thing. I've always said they should bin RT and upscale Phone to low spec and ARM tablets.

@nemesis - you can use existing Pi's as media PCs already with various Linux based options, including XBMC.


 
Posted : 02/02/2015 12:14 pm
Posts: 13594
Free Member
 

I might be off the mark but as I'm reading it, you could use this (with Windows 10 which will be free) to act as a media PC for well under £50 by my reckoning...

Assuming someone ports W10 to the Pi. The embedded version of W10 might run very slowly on the Pi, but it won't be a patch on a cheap desktop.


 
Posted : 02/02/2015 12:15 pm
Posts: 0
Free Member
 

Bloody typical, right after I bought a B+.

Snap. Actually, I'm wandering now if it was your amazon review that convinced me to go for the kit I picked up. Oh well, it's plenty powerful enough for my dicking about with MPD.


 
Posted : 02/02/2015 12:22 pm
Posts: 77347
Free Member
 

In moron terms, what are they good for? I hear a lot about them but never really pay much attention because the lingo gets a bit out of my depth. I'd like to know more and learn but don't know where to start.

Basically, they're a (really) small, cheap PC. Their USP is that they have input / output pins built in, so you can integrate them with electronics projects fairly readily.

I'm wandering now if it was your amazon review that convinced me to go for the kit I picked up.

Er, that's entirely possible. Though I'm slightly concerned as to how you worked that out. (-:


 
Posted : 02/02/2015 12:41 pm
Posts: 0
Free Member
 

Er, that's entirely possible. Though I'm slightly concerned as to how you worked that out. (-:

The reviewer was also named Cougar...
[img] [/img]


 
Posted : 02/02/2015 12:43 pm
Posts: 3544
Free Member
 

with Windows 10 which will be free

Win 10 is free as an upgrade from 7 or 8, not sure if it's going to a free purchase from scratch.


 
Posted : 02/02/2015 12:49 pm
Posts: 959
Full Member
 

Win 10 is free as an upgrade from 7 or 8, not sure if it's going to a free purchase from scratch.

A Raspberry Pi version of Win 10 was announced as being 'free' this morning.


 
Posted : 02/02/2015 12:52 pm
Posts: 77347
Free Member
 

The reviewer was also named Cougar...

Oh thank goodness. I thought I'd used my real name for a minute. As you were, Inspector.


 
Posted : 02/02/2015 12:53 pm
Posts: 0
Free Member
 

This is good news. My PiMulator (RetroPie) will now work a lot better!


 
Posted : 02/02/2015 12:54 pm
Posts: 77347
Free Member
 

RetroPie looks interesting. Amiga emulation?! Is that anything like usable performance?


 
Posted : 02/02/2015 1:06 pm
Posts: 12865
Free Member
 

I'm also interested in emulation, although I would be running PiMAME/PiPlay. I assume the performance is acceptable even on the original R Pi? (should hope so; used to run MAME on the first Xbox and that was fine!)


 
Posted : 02/02/2015 1:13 pm
Posts: 0
Free Member
 

@nemesis - you can use existing Pi's as media PCs already with various Linux based options, including XBMC.

I know but linux is, in the real world and IME of course, pretty hit and miss at least for those who want it to just do the job it's for rather than tinker with it.

With W10 on a Pi, you can have a media centre that works in a way that's familiar to most people for peanuts.


 
Posted : 02/02/2015 1:16 pm
Posts: 357
Free Member
 

Best place to purchase?


 
Posted : 02/02/2015 1:20 pm
Posts: 12865
Free Member
 

Possibly CPC Farnell - there's a bit of chat on some forums with people being unexpectedly stung for postage when buying from RS although there's not much in it.


 
Posted : 02/02/2015 1:26 pm
Posts: 0
Free Member
 

Cougar - Yes, very usable, I only find the slow downs occur with PS1 and games that use the advanced gfx chips inside consoles such as Star Fox on SNES. I'm hoping it'll be amazing with the Pi2.

ZiLog - I would use RetroPie, it has the setups for controllers and everything else all built in. It does MAME very well, Doom and Quake III work perfectly! I was/am using a Pi B, 2x PS3 controllers on bluetooth.

I forgot how good Micro Machines is!


 
Posted : 02/02/2015 1:31 pm
Posts: 0
Free Member
 

nemesis - Member
I know but linux is, in the real world and IME of course, pretty hit and miss at least for those who want it to just do the job it's for rather than tinker with it.

I'd never use it for the desktop, but for server use and media centre type stuff, it's rock solid usually. As long as you avoid the bleeding edge and experimental distributions.

If it's just a media centre, doesn't matter what the OS looks like as it's all covered by a fluffy media UI. I've run Windows as a media centre but I used MediaPortal for the app. In use wouldn't really know it was Windows.

Now I use my Smart TV in the Samsung telly as my media player (using the Plex app generally) and the media server is in my Synology NAS which is linux-ish based (BusyBox), and runs Plex server (you can run Plex on Windows also though).

Beauty is with the Pi you can just play about with each OS, stick them on a different SD card, and see what you like best.


 
Posted : 02/02/2015 1:37 pm
Posts: 12865
Free Member
 

ZiLog - I would use RetroPie, it has the setups for controllers and everything else all built in. It does MAME very well, Doom and Quake III work perfectly! I was/am using a Pi B, 2x PS3 controllers on bluetooth.
Awesome. Only really interested in MAME (Frogger & Joust are my faves!) - picked up one of these cheaply years ago but could never build a PC small enough to go inside it affordably. R Pi will be perfect, then I'll get a new one for media player duties!

[img] ?v=1386077287[/img]


 
Posted : 02/02/2015 1:39 pm
Posts: 77347
Free Member
 

Gosh.

Right, that's a project. Ta.


 
Posted : 02/02/2015 2:22 pm
Posts: 2597
Free Member
 

My B+ has literally just arrived on my desk.
Is it worth sending back and changing for the 2?
This is my first venture into using the raspberry Pi.
If it won't affect me while I learn I'd like to avoid the hassle/wait of swapping.


 
Posted : 02/02/2015 2:34 pm
Posts: 1369
Free Member
 

I ordered mine about 10am this morning from RS; will keep you updated on delivery etc.


 
Posted : 02/02/2015 2:38 pm
Posts: 12865
Free Member
 

Is it worth sending back and changing for the 2?
I would if it were me but it depends what you're going to be using it for I suppose. The original is capable but obviously 2½ years old whereas the new one is bang-up-to-date yet costs the same!


 
Posted : 02/02/2015 2:47 pm
Posts: 77347
Free Member
 

The only reservation I'd have is whether there's any compatibility issues with a new architecture. I'm sure it'll be fine over time as stuff gets fixed.


 
Posted : 02/02/2015 2:48 pm
Posts: 77347
Free Member
 

it has the setups for controllers and everything else all built in.

Does it support 360 controllers? Should just read the site I suppose.


 
Posted : 02/02/2015 2:49 pm
 cp
Posts: 8928
Full Member
 

The only reservation I'd have is whether there's any compatibility issues with a new architecture. I'm sure it'll be fine over time as stuff gets fixed.

stuff needs recompiling for multi-core support but reading through the raspberry website it seems pretty well tested. They purposely stuck with the ARM chip by the sound of it to try and ensure stability/compatibility.


 
Posted : 02/02/2015 2:51 pm
Posts: 0
Free Member
 

cokie - Member
My B+ has literally just arrived on my desk.
Is it worth sending back and changing for the 2?

Keep it, and order the 2 as well 😉

Can't have too many Pi's 😀 . They can be used for so many things. Currently got my old Pi working as a VPN server, though that's a bit dull.

Don't forget, the Pi also runs RISC OS if you're into some old British Acorn Archimedes style nostalgia 😉 (and remember the Pi was developed as a modern day sort of Acorn's BBC Micro, hence even the naming, Model A, B, B+)


 
Posted : 02/02/2015 3:07 pm
Posts: 0
Free Member
 

The new Pi does look good but it does seem to have compatibility issues with some distros such as RetroPie and Raspbmc ([url= http://lifehacker.com/the-raspberry-pi-2-is-faster-more-powerful-and-availa-1682814956 ]link[/url])

I'm sure they will be re-compiled within a few days


 
Posted : 02/02/2015 3:08 pm
Posts: 0
Free Member
 

Don't forget, the Pi also runs RISC OS if you're into some old British Acorn Archimedes style nostalgia (and remember the Pi was developed as a modern day sort of Acorn's BBC Micro, hence even the naming, Model A, B, B+)

Ooooh... A ROM of Pandora's Box would make me a happy man - wonder if I can get one up and running.


 
Posted : 02/02/2015 3:10 pm
Posts: 2344
Free Member
 

The RASPBMC chap has said he cant be arsed spending time porting it across to Pi2 while he's busy finalizing OSMC for April 2015. OSMC will be the RASPBMC replacement, and will be Pi2 compatible. No idea re OpenElec or XBIAN the other Pi XBMC builds


 
Posted : 02/02/2015 3:37 pm
Posts: 0
Free Member
 

lemonysam - Member
Ooooh... A ROM of Pandora's Box would make me a happy man - wonder if I can get one up and running.

The tricky thing is the ARM chip on the Pi is full 32bit addressing but the old ARM2 was 26bit, and apparently many of the old native games would have to be rebuilt to work on the modern ARM chips sadly. A few I think have been updated, but a lot haven't.

Though there are emulator options to emulate the 26bit ARM. There's some for RISC OS that'll run on the Pi. Supposedly this will get Elite working http://www.themagpi.com/issue/issue-13/article/risc-os-elite/ (still the best version of the original Elite in my opinion).


 
Posted : 02/02/2015 3:44 pm
Posts: 0
Free Member
 

Thanks for the heads up, have just ordered one!


 
Posted : 02/02/2015 4:03 pm
Posts: 77347
Free Member
 

RetroPie - have you got the control block?


 
Posted : 02/02/2015 4:51 pm
Posts: 31206
Full Member
 

PiMAME you say:


 
Posted : 02/02/2015 5:26 pm
Posts: 91000
Free Member
 

If anyone wants to sell an old pi I'm interested.


 
Posted : 02/02/2015 8:08 pm
Posts: 11605
Free Member
 

If it performs as well as I hope then bring it on!

Was going to get my B set up for media duties but I think I know what the last of my christmas money is going on 😀

Might get a touchscreen and put the B in the car, plenty of power to play tunes and run diagnostics.


 
Posted : 03/02/2015 4:41 am
Posts: 11605
Free Member
 

Just remembered my B is actually a Mk1 with 256mb RAM, nothing more than a luxury A. Definitely upgrade time!


 
Posted : 03/02/2015 5:34 am
Posts: 0
Free Member
 

[quote=squirrelking ]Just remembered my B is actually a Mk1 with 256mb RAM, nothing more than a luxury A. Definitely upgrade time!

I have one of those, though for the electronic interfacing I do with it, the only real advantage to one of the latest ones is the improved packaging and use of a micro sd. This new version opens up some possibilities though - have just been discussing it, and we're looking seriously at the idea of getting a load of them to use as thin clients (the older version is almost, but not quite up to the job). I reckon £50 all in for that functionality including case, PSU, keyboard and mouse (add £70 for a monitor) has to be a bargain.


 
Posted : 03/02/2015 9:41 am
Posts: 31206
Full Member
 

Couple of good summaries from Make:

(Assuming you can understand the second guy! The subtitles are particularly helpful 🙂 )


 
Posted : 03/02/2015 11:19 am
Posts: 0
Free Member
 

[quote=aracer ]I reckon £50 all in for that functionality including case, PSU, keyboard and mouse (add £70 for a monitor) has to be a bargain.

Actually scratch that, have done a shopping list on CPC and I can get everything but the monitor for £47, £25 for a monitor on ebay (I reckon we might wangle a discount if we buy a load), so £72 per seat.

[quote=GrahamS ]The subtitles are particularly helpful )

"peace up his holler scholar"
er, yeah, he seems to have broken youtube


 
Posted : 03/02/2015 12:06 pm
Posts: 1646
Full Member
Topic starter
 

Well you can probably guess how long I lasted before ordering one, it arrived this morning

[img] [/img]


 
Posted : 03/02/2015 8:55 pm
 cp
Posts: 8928
Full Member
 

Mine too 🙂


 
Posted : 03/02/2015 9:18 pm
Posts: 0
Full Member
 

Ordered mine at 2pm, showing stock and expecting delivery today, just had an email saying I won't get it until 21 Feb 🙁
At least there's a chance retropie will be working by then 🙂


 
Posted : 03/02/2015 9:24 pm
Posts: 1908
Full Member
 

So would this be a good /cheaper way of having a nas server? I was using a usb hdd plugged into my bt router to serve music/backup and serve photos but for some random reason it stopped working despit the hdd being fine on a laptop.

Is there an easy way of setting this up?


 
Posted : 03/02/2015 9:31 pm
Posts: 8669
Full Member
 

What would i need to get one of these to play old Amiga games on? Are old games downloadable somewhere? Aaah, rainbow islands!


 
Posted : 03/02/2015 9:43 pm
Posts: 0
Free Member
 

Just as I settle down to do Raspberry Pi programming and need to keep referencing the forums, the bloody world DDOS's the rpi servers for 2 days!! FFS


 
Posted : 03/02/2015 10:04 pm
Posts: 0
Free Member
 

So would this be a good /cheaper way of having a nas server? I was using a usb hdd plugged into my bt router to serve music/backup and serve photos but for some random reason it stopped working despit the hdd being fine on a laptop.

They don't make great NAS servers to be honest. USB port is fairly slow, think it shares bandwidth with the SD card or something. Also ethernet port is only 100Mbps. It's not fast enough to stream HD video from anyway, but music and photos would probably be ok.

As for setting it up, you'll have to follow a guide / edit files yourself from a Linux command line. Here's a guide:
[url= http://elinux.org/R-Pi_NAS ]http://elinux.org/R-Pi_NAS[/url]

I don't use mine as a NAS. It's my VPN end-point and also does backup duties from a NAS to the cloud.


 
Posted : 03/02/2015 10:19 pm
Posts: 0
Free Member
 

They make good reliable firewalls/routers/WAP.

We have one as a media centre (RaspbMC), one as a headless audio unit (in the garage), and another as a remote RaspMC (OpenVPN/NFS is preconfigured to phone home) at a friends house.

The RPi 2 looks promising as a silent desktop for me for work ( Linux SysAdmin )


 
Posted : 03/02/2015 11:41 pm
Posts: 13916
Free Member
 

It's good they've done this but the extra power wouldn't help me. My 3 Pi's are running applications that check temperatures every 5-10 mins and switch things on and off .... not exactly intensive.
That said I'm sure I'll get one!


 
Posted : 04/02/2015 9:02 am
Posts: 13916
Free Member
 

At least there's a chance retropie will be working by then

Emulation?
[url= http://www.raspberrypi.org/blog/#emulation-on-raspberry-pi-2 ]Just for you Mike[/url]


 
Posted : 06/02/2015 7:30 pm
Posts: 0
Full Member
 

That looks promising 🙂

It turned up yesterday but I doubt I'll have time to play with it this weekend, hopefully I'll finally get round to finishing the mamecab I started almost a decade ago 😳


 
Posted : 07/02/2015 8:37 am
Posts: 7857
Full Member
 

I've ordered one. Been thinking about it for a while but the new spec's a no brainer.

Now just need to decide what to do with it...


 
Posted : 07/02/2015 10:42 am
Posts: 2
Free Member
 

[url= http://www.raspberrypi.org/forums/viewtopic.php?f=28&t=99042 ]nullJust don't use your personal photon cannon[/url]


 
Posted : 08/02/2015 7:05 am

6 DAYS LEFT
We are currently at 95% of our target!