You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
How concerned are people about burning treated wood? For themselves, the environment and the wood burner itself.
We're very careful with that we burn but I see some people who use it like some sort of refuse incinerator.
I burn treated wood in ours...
I separate out the treated and untreated scraps. Untreated gets burnt, treated goes to the wood section at the dump (where I suspect it gets burnt but hopefully with better filtration). That said most wood scraps end up in the 'might be useful on day' pile and stay in the shed.
Shed that came with the house has been our kindling for the last couple of years, just one side left now.
Was a pretty rubbish shed, minimal amount of preservative anyway.
I'm burning the contents of my house at the mo, solid wood only and I'm stopping at 25 layers of gloss painted skirting boards, but everything else that is varnished, waxed etc is fair game
Burn the bloody lot. Any fancy, poncy, new age fads about burning treated wood at this level is at best Ballcocks and at worst no where near as bad as firing up the T5 /Audi for a trip to the tip even if you water that down with a 3 hour drive to your nearest trail park.
Sorry, but it's not a new age fad (something I also share a dislike of) to think about what you're burning in a wood burner. More importantly, what you're scooping back out.
I'm a newcomer, but there's pretty strong evidence that tanalised timber is a very unwise move for starters.
Never thought about it before, as I have masses of the stuff, but......
[url= http://www.gw.govt.nz/assets/RelocatedUploads/Adlam205/Burning-issues-brochure.pdf ]clicky[/url]
My next door neighbour had a BBQ last week. It was an old gas BBQ they were using without gas but old fence panels for fuel, the smoke and the smell was ridicules.
There English is very poor so when I objected and suggested smokelesscharcoal was what they should be using if not gas, it fell on deaf ears.
I really don't want to call the council as I have to live with them,
It was an old gas BBQ they were using without gas but old fence panels for fuel, the smoke and the smell was ridicules.
I'm sure it gave the road kill they were cooking a more interesting flavour!
Virtually almost nothing treated burnt here. A very small amount of tanalised, as in about 3' of 2*4 out of 6.5m³ of wood burnt. I don't need to burn it and I know that painted or creosoted wood will creosote the flue heavily, so it's not being done. Not that worried about health risks/pollution but I can and do feel smug knowing I don't contribute by bad practices.
If it burns, I will burn it.
Treated wood makes kindling.
But don't burn it regularly, the stove is our house heater not a refuse incinerator. I would like less maintenance and acidic gunk on the flue liner rather than more, and prefer to dump less toxic crud on the land nearby rather than more. Save the planet, etc.
I use old pallets for kindling.
Any offcuts from DIY / carpentry get burnt. My brother had a whole load of decking off cuts which we've been burning along with 'proper' wood for the last month or so. We have to burn it sparingly as it goes like the clappers being so dry....
Depends on age. Freshly treated i tend to avoid (and goes in my offcuts stash). Old treated where the treatment is pretty much shagged goes in, but i like a nice hot stove on clean stuff first.
painted stuff no.
my MiL puts formica covered chipboard in hers (despite my protestations).
my MiL puts formica covered chipboard in hers (despite my protestations).
Everyone should know that you never put formica in a wood burner, you save it for Nov 5th and stuck it in the bonfire....
I have to confess to burning all the kitchen units when I ripped out the old one about 20 years ago. Possibly a few mattresses as well...
Disappointed not to see a 8 x 6 log burning stove capable of fitting a shed in.
I tend to throw old sheds, treated timber on the firepit and invite friends round to breathe in the fumes, they have never complained.
Disappointed not to see a 8 x 6 log burning stove capable of fitting a shed in.
I tend to throw old sheds, treated timber on the firepit and invite friends round to breathe in the fumes, they have never complained.
No treated stuff goes on my fire anymore. Maybe about 2 years ago but now I'll use a pallet for kindling if I can't get my hands on some pine trees to process. Has to be MB free, obviously, so have to check some foreign pallet stamps to be certain.
It's not so much the smoke as the ash.