*%£^ing Lime Scale
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] *%£^ing Lime Scale

9 Posts
10 Users
0 Reactions
70 Views
Posts: 0
Free Member
Topic starter
 

After some advice from the STW brain cell..

We live in a really hard water area and it's playing havoc with our water system. We've just had our second shower die in the last 5 years, our boiler seems a little 'wobbly' on it's legs and I get concerned each time the washing machine is switched on (and with a biker and a 9 month old baby in the house, that's a fair bit).

I'm looking at what we can do, the water company were ****ing useless when I tried them so the next option is looking at scaler removers/inhibitors for the main incomer..

Anyone any experience, recommendations?

Cheers

Bedds 🙂


 
Posted : 19/07/2010 2:53 pm
Posts: 0
Free Member
 

http://www.weebls-stuff.com/wab/stains/


 
Posted : 19/07/2010 2:58 pm
Posts: 7915
Free Member
 

Best option is going to be a softener on the main incomer TBH. You'll have to pay for it to be done privately though.


 
Posted : 19/07/2010 3:13 pm
Posts: 0
Free Member
 

Those fangled gadgets which you wrap a wire with a little signal generator, or plumb in the magnetic coil thing. They really do help - for definite.

I was once sceptical, but it's not entirely snake oil. I got convinced some years ago when I lived in Cambridgeshire, and I always use them nowadays. Not a solution but a worthwhile improvement.


 
Posted : 19/07/2010 3:13 pm
Posts: 31206
Full Member
 

I remember reading a scientific article somewhere or other which suggested that in very hard water areas, washing machines live longer with Calgon.


 
Posted : 19/07/2010 3:14 pm
 Drac
Posts: 50352
 

lol Graham.


 
Posted : 19/07/2010 3:22 pm
Posts: 0
Free Member
 

the device that Mountaincarrot mentions above works for us, we live in surrey, very hard water area, but our kettle is still bright and shiny after three years and when we had our heating system replaced there was minimal scale in the cylinder. been using one for over twenty years and really recommend it. [u]
[b]BUT[/b][/u] my wifes aunt who lives nearby tried one and she did not notice any benefit
We use a [url= http://www.scalewatcher.co.uk/ ]Scalewatcher[/url] as it came with a money back guarantee at the time


 
Posted : 19/07/2010 3:40 pm
Posts: 3
Free Member
 

As above get one of the electromagnetic jobbies that wind round your mains supply pipe. Get a decent one (about £100 IIRC) and wind both coils tight and close as per the instructions or it's not so effective

Worked for us in the Cotswolds - very hard water. Doesn't prevent scale completely but it definitely helps


 
Posted : 19/07/2010 4:11 pm
Posts: 890
Full Member
 

Gave up with the ectromagnetic jobbies aand got a water softner. Not cheap but solves the problem


 
Posted : 19/07/2010 8:17 pm
 Bear
Posts: 2311
Free Member
 

only way to soften the water is a water softener.

none of the electromagnetic things really work when you heat water instaneously. polyposphate dosing does but doesn't soften.

I'm a dealer for a particular water softener and beware there is a lot of money to be made in water treatment. I only really sell them as part of a renovation, but they are a good softener.


 
Posted : 19/07/2010 9:24 pm

6 DAYS LEFT
We are currently at 95% of our target!