B&O 1970s turnt...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] B&O 1970s turntable - would you bother with it?

14 Posts
11 Users
0 Reactions
174 Views
Posts: 13617
Full Member
Topic starter
 

My dad has one of these that hasn't been used for 15+ years.

I know it starts up and works, but is the belt likely to have degraded. And what other issues could there be? Are parts still available?

I know the stylus's can be very expensive, but this didn't get that much hammer when were growing up so may be OK. Have aftermarket ones been developed?

It's one of these - Beogram 1202...

[img] [/img]


 
Posted : 17/04/2016 2:12 pm
Posts: 5559
Free Member
 

LP technology has npt really moved on

My deck is about that age and nothing really to break

Belts - assuming elastic/rubber band type - are £3 for ebay or amazon

Stylus cost is the main issue - not sure what it would be on one of those or whether you can just get a separate needle


 
Posted : 17/04/2016 2:26 pm
Posts: 13601
Free Member
 

Hell yes. Looks like a work of art! Beautiful, rare, and with a nice story behind it. What's not to like? 🙂


 
Posted : 17/04/2016 2:38 pm
Posts: 13617
Full Member
Topic starter
 

What's not to like?

The possibility it may cost a small fortune to get working optimally. I don't want to be taking it to a B&O dealer and ending up with a £400 bill! 😀

My dad bought the whole B&O matching set-up in the 70s. Amb and tuner broke a long time ago though.

Just wondered if a modern low-end Project or Rega turntable may be better. Or if this would still hold it's own.


 
Posted : 17/04/2016 2:42 pm
Posts: 3899
Free Member
 

Beautiful!
desrves to be sparked up once again.


 
Posted : 17/04/2016 2:43 pm
Posts: 13601
Free Member
 

As above belts are silly cheap. And if you don't want to spend tons on a cartridge, then don't. No one will notice the difference! 🙂


 
Posted : 17/04/2016 2:49 pm
Posts: 13601
Free Member
 

In fact from your post it sounds like it may have one still already. I honestly think that £20-40 is fine for a cartridge, anything above that and you're starting to get into 'Monster Cables' territory. Seriously, keep the deck, it's really simple tech so there's very little to go wrong and the newer ones don't sound any better, and it'll be a nice reminder of your family.


 
Posted : 17/04/2016 2:54 pm
Posts: 0
Free Member
 

Keep it these were made in a era when quality counted and hence one of the reasons why they have lasted so well and still sought after,
these are going for circa £300 - 400 on ebay sometimes more.

Might be worth a read on here
http://archivedforum.beoworld.org/forums/


 
Posted : 17/04/2016 3:03 pm
Posts: 8849
Free Member
 

just "serviced" mine (took it apart and cleaned grime off), it's 30 years old and still good, original belt in good order etc
[IMG] [/IMG]


 
Posted : 17/04/2016 3:16 pm
Posts: 0
Free Member
 

It's worthless - send to me and I'll sort t the recycling for you at no charge.


 
Posted : 17/04/2016 4:20 pm
Posts: 13617
Full Member
Topic starter
 

Time to prize it off my dad then!


 
Posted : 18/04/2016 8:56 am
Posts: 24332
Full Member
Posts: 22
Free Member
 

my old man still has his BandO system from when i was a kid. fantastically made kit


 
Posted : 18/04/2016 9:27 am
Posts: 0
Free Member
 

do it up if it easy and cheap and sell it - in performance terms a rega will be a lot better I reckon.


 
Posted : 18/04/2016 10:00 am
Posts: 17779
Full Member
 

I agree with TurnerGuy. Flog it and put the money to a modern one - A Rega or Planet.


 
Posted : 18/04/2016 10:14 am

6 DAYS LEFT
We are currently at 95% of our target!