 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Have got minor wobble from side to side with rear wheel on M109C Team '14 running rear wheel as follows:
Whyte XC-209-C Team Carbon Wheelset, 28 Straight Pull StSt spokes, 12mm E Thru, Alloy Freehub, 6 Bolt hub with double sealed cartridge bearings
Have opened it up and freehub bearing seems fine. Drive side looks like pic below, and when I pull the axle it moves a tiny bit in and out, which seems to be the amount of movement when the wheel is in the bike.
[url= https://farm1.staticflickr.com/697/20823164120_feb069371a_b.jpg [/img][/url][url= https://flic.kr/p/xJ5ae3 ]P1090615.JPG" target="_blank">https://farm1.staticflickr.com/697/20823164120_feb069371a_b.jpg [/img][/url][url= https://flic.kr/p/xJ5ae3 ]P1090615.JPG"/> [/url] by [url= https://www.flickr.com/photos/cakefest/ ]cakefest[/url], on Flickr
How can I get the axle out to check the hub bearings?
Non-drive side looks like this but I can't work out how to take that end cap off:
[url= https://farm1.staticflickr.com/755/20824437979_3bca28167e_b.jpg [/img][/url][url= https://flic.kr/p/xJbFU8 ]P1090613.JPG" target="_blank">https://farm1.staticflickr.com/755/20824437979_3bca28167e_b.jpg [/img][/url][url= https://flic.kr/p/xJbFU8 ]P1090613.JPG"/> [/url] by [url= https://www.flickr.com/photos/cakefest/ ]cakefest[/url], on Flickr
Just remove the rotor and pull...? First time on new Hope hubs they are really tight, they become a tad looser after a few times.