You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
So I've ended up with 3 bikes...all running Shimano brakes...one XT one SLX one Deore. Wanted to stock up on pads. Which ones...best compromise of quality/value.
Shimano pads. Wouldn't bother with any others. They work, they last well, they might be a bit more expensive but fit and forget
Suoerstar pads. Wouldn't bother with any others. They work, they last well, they are cheap and fit and forget. Normally go for Kevlar as a good all rounder
after my last superstar pads lasted 2 rides (cheap pads) I switched to [url= http://www.rahoxbrakes.com/ ]Rahox pads[/url] (not so cheap pads) been impressed with them so far.
Sorry nickjb, my experience with SS pads isn't that positive.
Always used superstar pads for years on my shimano. Yet to have a single issue.
Superstar kevlar, 4 bikes for 6 years in xt and slx, never a fault.
We have Uberbike race matrix in all ours. Used them in the Alps and throughout the winter in the Peak. They work well for us in all conditions.
Are Uberbike and Superstars from the same factory?
Another Rahox fan here!
Just using the Shimano ones, they last long enough that I'm not that concerned by the price, coming with pins and springs is good
Shimano pads. All the cheap knock off's last a fraction of the time & never work as well as the originals.
Last collection of cheap knock offs' (3 sets) wore our quicker than one set of Shimano sintered & when they go t warm the felt really odd (sticky on the rotor).
Shimano sintered pads here. I'm happy enough to pay £20 a pair for Saint finned pads in the knowledge that they work well, work consistently and last a long time.
I've tried über bike pads and binned the set I didn't use.
Shimano here too. I know there are cheaper options but the Shimanos seem to last for ages so saving over time is minimal
Shimano
Too much of a lottery with the third party pads and I CBA compromising a killer brake setup for the sake of a few quid
Cheers all...think I'll stick with Shimano.
Noticed that Halfords sell shimano sintered pads for 7.99 behind the bike counter but clarks pads on the shelf for 9.99
What's that all about? Prefer shimano resin ones myself though.
I've just replaced some XT finned pads with superstar sintered and to my surprise the superstar pads have loads more bite.
Uber race matrix
Agreed on the cheap not being worth it. I've had too many bad experiences. Rahox IME and for my normal conditions are slightly better than the shimano pads, finned or not.
About to buy some new shimano pads myself - worth getting the ones with the cooling fins or not?
Shimano pads. Wouldn't bother with any others. They work, they last well, they might be a bit more expensive but fit and forget
+1
Make sure you shop around for prices though, also when I tried the metal finned on my CX bike they made an awful noise, I've gone back to resin finned and the problem's gone. I always use metal on the MTB, never had any noise problems there.