What rear MTB Hub?
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] What rear MTB Hub?

8 Posts
9 Users
0 Reactions
61 Views
Posts: 2
Free Member
Topic starter
 

I normally ride single speed but am finding i am riding in more hillier terrain and want to add a 1x11 geared setup.

I am asking what rear hub people would recommend. I am looking at the following:

Chris King
White Industries M16
DT Swiss 240
Industry 9
Hope

Is there any others i should be looking at? They need to be good quality/robust/serviceable.

At present i am being drawn towards White Industry as they can be easily serviced at home and dont require special tools.


 
Posted : 31/01/2015 9:20 pm
Posts: 0
Free Member
 

Hope would be your best bet. They're pretty bombproof and are easily serviceable. If you don't like the hyper-clakyness of the hope hubs, DT swiss are also recommendable.


 
Posted : 31/01/2015 9:25 pm
Posts: 1352
Free Member
 

DT240 without question.


 
Posted : 31/01/2015 9:36 pm
Posts: 0
Free Member
 

I haven't built the wheel yet, but I got a Nukeproof rear hub. I fancied something other than Hope.


 
Posted : 31/01/2015 9:41 pm
Posts: 1
Free Member
 

I've got hope, chris king and DT on various bikes.

Firstly the Hope is functional but I hate the noise, it's on the DH bike so the noise doesn't really figure when riding properly

The Chris King is lovely, a joy to ride, touch, hear. It's been bombproof in reliability in the over five years of ownership.

The DT Swiss 240 is nice, a really nice hub, better finished then the hope but not in the CK league by a fair way.

although the CK is lovely, it's not worth the RRP. by all means get one if you see it discounted. I think I paid £220 for mine when they were £360. No idea how much they are now as that was over five years ago

If I was to start over, I'd be buying DT every time. Nice engagement, nice build, nice noise. If I saw a CK at similar reductions though, I'd be very tempted.


 
Posted : 31/01/2015 9:42 pm
Posts: 119
Free Member
 

Dt for me
Just keeps working. Only issue is changing the bearing under the ring drive but that one seems to last ages
Although I have been impressed with the stans hubs too


 
Posted : 31/01/2015 9:49 pm
Posts: 1195
Full Member
 

Hope do make nice hubs. Spares are easy to get hold of, and they're easy to fix and maintain yourself. If it really goes wrong... even after a few years use... they'll replace it, no questions asked.

Oh and the clicking is great. tck tck tck tck 😀


 
Posted : 31/01/2015 9:53 pm
Posts: 13240
Free Member
 

Nukeproof Generators.
On the Winter hartail now .
4 years ,one set of bearings,easy to service.


 
Posted : 31/01/2015 9:59 pm
Posts: 10942
Free Member

6 DAYS LEFT
We are currently at 95% of our target!