What new 'endu...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] What new 'enduro' bike?

333 Posts
87 Users
0 Reactions
619 Views
Posts: 1711
Full Member
 

What are those forks on that Dune? Rockshox with marzocchi uppers!?!! Ardents front and rear on a bike like that is a bit strange too.


 
Posted : 02/11/2015 10:28 pm
Posts: 0
Free Member
 

Meh. I quite like my YT Capra. I am faster on it than my previous El Guapo.

Then again, I have ridden really short DH bikes and had so much fun. Apparently that is wrong because it isn't stable and long or something.

Radical idea but maybe what you like is subjective?


 
Posted : 02/11/2015 11:59 pm
Posts: 16216
Full Member
 

Radical idea but maybe what you like is subjective?

Subjectivity on STW?? Not a chance my friend.

Though I totally agree with you for what little its worth.


 
Posted : 03/11/2015 12:14 am
Posts: 0
Free Member
 

2016 Norco Sight C7.2:

[img] [/img]

http://www.evanscycles.com/products/norco/sight-c72-2016-mountain-bike-ec121342


 
Posted : 03/11/2015 6:21 am
Posts: 23277
Free Member
 

Have norco changed designers? That's the first norco I've seen in years that hasn't been beaten with the ugly stick


 
Posted : 03/11/2015 6:25 am
Posts: 17
Free Member
 

Radical idea but maybe what you like is subjective?

Mostly why if I'm spending decent money I want to try it first, numbers don't always translate from paper to trail.


 
Posted : 03/11/2015 6:27 am
Posts: 0
Free Member
 

[URL= http://i1239.photobucket.com/albums/ff501/harrybarfield/metav4.jp g" target="_blank">http://i1239.photobucket.com/albums/ff501/harrybarfield/metav4.jp g"/> [/IMG][/URL]


 
Posted : 03/11/2015 7:51 am
Posts: 0
Free Member
 

always think it's a good idea to try before you buy,


 
Posted : 03/11/2015 8:00 am
Posts: 1748
Free Member
 

You can get an Enduro 650b Elite for £2500 if you ask around nicely.

Pike, CC Dbline (which you can swap for a Monarch rc3), SRAM 11sp, SRAM Guides, Specialized Internal Dropper, 30mm wide DT swiss wheels. And a very light and amazing looking frame.

Plus, if your LBS does it, you get Local support.

[img] [/img]


 
Posted : 03/11/2015 9:01 am
Posts: 34376
Full Member
 

Commencal are great, but they use press fit BB and internal headsets, which are probably fine in Andorra, but TBH there are better ways of attaching cranks and forks to a bike, especially in the middle of a British winter slop,


 
Posted : 03/11/2015 9:02 am
Posts: 0
Free Member
 

I've had a YT Capra AL1 for a couple of months now and very impressed


 
Posted : 03/11/2015 9:16 am
Posts: 0
Free Member
 

That Enduro Elite looks a great bike for the £££


 
Posted : 03/11/2015 9:58 am
Posts: 728
Free Member
 

The problem is the OP asked for something in the long & slack zone - the Enduro isn't exactly long, for a given size - it's distinctly average.

And you have to put up with other annoyances, such as Campy style headsets, proprietory shock mounts, which limit your choices for shocks, PF30 BB's & their own version of 142 back ends.


 
Posted : 03/11/2015 10:18 am
Posts: 8722
Free Member
Topic starter
 

Thanks all - some good suggestions. Liking the look of the Norco especially.

Thats one thing I really don't want though - propriety shocks, headsets, bottom brackets or anything. Ideally it'll just use a 'normal' (whatever that is these days - taper or 44mm) headset, normal HT2 style bottom bracket and no weird and wonderful rear hub arrangements or shocks. Thats kinda what keeps taking me back to the Oranges as they're simple in all respects but I know they're a great riding bike. Just struggling to see past the expense.

Maybe I should try building one from scratch? Anyone done that and got it cheaper than the off-the-shelf builds? Wonder how much a Five with Pikes, Hope wheels, Reverb and SLX kit would come in at...


 
Posted : 03/11/2015 11:47 am
Posts: 17
Free Member
 

Thats one thing I really don't want though - propriety shocks, headsets, bottom brackets or anything. Ideally it'll just use a 'normal

Well that rules out specialized.


 
Posted : 03/11/2015 11:49 am
Posts: 65918
Free Member
 

I_did_dab - Member

Have you considered the Ibis mojo HD3?
It goes up as well as down...

He did ask for long, HD3 is not


 
Posted : 03/11/2015 11:49 am
Posts: 40225
Free Member
 

Ideally it'll just use a 'normal' (whatever that is these days - taper or 44mm) headset, normal HT2 style bottom bracket and no weird and wonderful rear hub arrangements or shocks

I'm totally with you on this, BUT I've caved in on press-fit BBs because it just rules too many bikes out and they actually seem to work pretty well nowdays.


 
Posted : 03/11/2015 11:53 am
Posts: 33980
Full Member
 

Yeah my bb92 (xtr) has been no different from any other bb, in terms of longevity

Long, slackish, steep seat angle , short stays to keep it fun is importanr


 
Posted : 03/11/2015 11:59 am
Posts: 3551
Full Member
 

DaveyBoyWonder - Member
Maybe I should try building one from scratch? Anyone done that and got it cheaper than the off-the-shelf builds? Wonder how much a Five with Pikes, Hope wheels, Reverb and SLX kit would come in at...

I imagine a good bit less than £4k, oranges aren't know for being good value stock builds.

Edit: Quickly off the top of my head and don't think I've missed anything (I've been looking at a new build recently :D)
Frame £1600
forks £500
wheels £350
xt group set £300
brakes £100
reverb £200
bars/stem £150
others £100
= £3,300

Edit 2: What about a Transition Patrol, I've been looking at the Scout!


 
Posted : 03/11/2015 11:59 am
 grum
Posts: 4531
Free Member
 

So YT are no longer niche enough for STW eh? That didn't take long did it.


 
Posted : 03/11/2015 12:49 pm
Posts: 0
Free Member
 

I am looking at the new Orange Five. I managed to put together a very good spec for 3.5k on http://www.sunsetmtb.co.uk/. So not too far over your budget if you are a fan of Orange bikes. The 0% interest option on this website is very appealing as well.

happy bike shopping!


 
Posted : 03/11/2015 1:05 pm
Posts: 0
Free Member
 

The other half of the fun is chatting about them on internet forums...and for that job, the likes of the YT Capra is useless. Bought by the types of people whose wardrobes probably contain an item of FireTrap or SuperDry clothing, they are the most generic/dull/tasteless bike on the market.

A three and a half grand full suspension super bike with Kashima might impress your nextdoor neighbour's children, or the lads on the shop floor; but if you want to impress the real cyclists on the internet then you need to broaden your horizons. Boasting about how many miles you've done just makes you sound big headed.

This is a joke, right?

As a YT owner that doesn't describe me at all. Not even remotely.

And what does "real cyclist" mean?

Mentioning how many miles you've done may be a bit of mild willy waiving, but suggesting people who own a certain brand of bike aren't 'real' cyclists is absurd.

Do you have to be niche and 'alternative' to be a real cyclist? WTF?

Singletrack elitism at its utter worst. Why should people feel the need to impress the likes of you? You're a faceless nobody on a forum.


 
Posted : 03/11/2015 1:22 pm
Posts: 13942
Full Member
 

This is a joke, right?

Yes! 🙂


 
Posted : 03/11/2015 1:30 pm
Posts: 0
Free Member
 

Oh thank God!

Faith in humanity is restored, I'd hoped there weren't really be such nobends out there!


 
Posted : 03/11/2015 1:35 pm
Posts: 8177
Free Member
 

I'll just leave this here to tempt you again DBW, a Five family reunion 🙂

[img] http://bit.ly/1SlgtZy [/img]


 
Posted : 03/11/2015 1:37 pm
 grum
Posts: 4531
Free Member
 

Very tempted to stick one of those new blue Lyrik Capras on my credit card. I don't even care if it's not that amazing, I just think it looks cool. 😉


 
Posted : 03/11/2015 1:42 pm
Posts: 0
Free Member
 

Unless they've changed their payment methods, you can't stick it on your credit card.

Cash or Paypal (plus the fees) only I'm afraid.


 
Posted : 03/11/2015 1:56 pm
Posts: 1748
Free Member
 

PayPal credit?

The Enduro is long, just not by today's mega long standards. It's got very short chainstay, which impacts on overall length.

Depends on if you really need something that long, do you do many flat out, straight line descents?


 
Posted : 03/11/2015 1:59 pm
 grum
Posts: 4531
Free Member
 

You can pay on credit card but there is a fairly hefty fee (I think 80 euros). Paypal fees are quite a bit higher. But then they are on sale at the moment.... 🙂

Works out £2758 all in according to google currency conversion. Bit cheeky that they charge you extra for the bike box.


 
Posted : 03/11/2015 2:03 pm
Posts: 0
Free Member
 

rickon
The Enduro is long, just not by today's mega long standards. It's got very short chainstay, which impacts on overall length.

I had a wee sit on a large 2016 Enduro last week, I think it's only a 17" in old money. With a shorter stem I could see myself on one very easily and I'm 5'9. But yes, they are a step behind which is ironic considering Spesh were always the go to option for long tt/short cs bikes.

Depends on if you really need something that long, do you do many flat out, straight line descents?

I think it's stability in general, not just straight line.


 
Posted : 03/11/2015 2:10 pm
Posts: 8722
Free Member
Topic starter
 

Stop it Jason. That looks ace 😉


 
Posted : 03/11/2015 2:10 pm
Posts: 0
Free Member
 

Works out £2758 all in according to google currency conversion

I've just done the same exercise. I don't care what anyone says, that is an awful lot of bike for the money (and I don't mean just the spec!)


 
Posted : 03/11/2015 2:13 pm
Posts: 40225
Free Member
 

If you're not too lengthy in the body and don't mind the possibility of some downtime if the frame cracks, it's a steal of a deal.


 
Posted : 03/11/2015 2:22 pm
 grum
Posts: 4531
Free Member
 

Oh shit I've only gone and done it. 😯 My missus is going to be well impressed!

Time to start selling some surplus camera equipment. 😀

[img] [/img]


 
Posted : 03/11/2015 2:43 pm
Posts: 0
Free Member
 

😆

Good man!

Oh hang on, aren't you concerned it might crack 😯 ,
or that the top tube is 0.7mm different to what's 'on trend' at the moment, the handling will be shite!!
And don't get me started on the head angle, that 0.25deg will surely damage your Strava times!!
OMG, and what about the 'dynamics/kinematics'?? Have you calculated all those 4th order differential equations needed to predict its handling from the static geometry figures??
You crazy, reckless, 'not a real cyclist' loser you!!!!! 🙄


 
Posted : 03/11/2015 3:01 pm
Posts: 919
Free Member
 

mmmm, nice. What size did you get / how tall are you.?

Im about to buy one myself very soon.


 
Posted : 03/11/2015 3:23 pm
Posts: 0
Free Member
 

poisonspider

Oh hang on, aren't you concerned it might crack ,
or that the top tube is 0.7mm different to what's 'on trend' at the moment, the handling will be shite!!
And don't get me started on the head angle, that 0.25deg will surely damage your Strava times!!
OMG, and what about the 'dynamics/kinematics'?? Have you calculated all those 4th order differential equations needed to predict its handling from the static geometry figures??
You crazy, reckless, 'not a real cyclist' loser you!!!!!

Why should he worry about that....LOOK AT THE PARTS ON IT!!!!


 
Posted : 03/11/2015 3:26 pm
Posts: 0
Free Member
 

He did ask for long, HD3 is not

Fair enough, I've only used a tape measure to measure the sag on the rear shock...


 
Posted : 03/11/2015 3:34 pm
Posts: 0
Free Member
 

Why should he worry about that....LOOK AT THE PARTS ON IT!!!!

I wasn't going to mention it again JJ but anyway,

I'm intrigued in what you meant when you said you consider the 'dynamics/kinematics' of a bike, based on its geometry.

Can you explain using the YT (or any other bike I guess) as an example?


 
Posted : 03/11/2015 3:42 pm
Posts: 653
Free Member
 

Smooth moves Grum ,enjoy it.As your getting it going into winter,keep a regular check/dry/clean re-grease that rear e13 hub the sealing on mine was very poor and the internals not very robust,it's an easy and needed job. The seals are now mean't to be improved.


 
Posted : 03/11/2015 3:43 pm
Posts: 0
Free Member
 

poisonspider

I wasn't going to mention it again JJ but anyway,

You weren't going to mention it? What was this then?.

poisonspider

Oh hang on, aren't you concerned it might crack ,
or that the top tube is 0.7mm different to what's 'on trend' at the moment, the handling will be shite!!
And don't get me started on the head angle, that 0.25deg will surely damage your Strava times!!
OMG, and what about the 'dynamics/kinematics'?? Have you calculated all those 4th order differential equations needed to predict its handling from the static geometry figures??
You crazy, reckless, 'not a real cyclist' loser you!!!!!


 
Posted : 03/11/2015 3:46 pm
 grum
Posts: 4531
Free Member
 

mmmm, nice. What size did you get / how tall are you.?

Im about to buy one myself very soon.

5'8 (just about) and got a small. I have a medium Pitch with 36 Vans on it at the moment and I love it but I actually fancied something a bit smaller/shorter and lighter (though the wheelbase on the Capra isn't that much shorter I don't think).

The Pitch feels amazing blasting straight down rocky stuff fast and is very stable but doesn't feel all that manoeuvrable (or 'chuckable' 😉 ) for me.

Cheers gravesendgrunt - will keep an eye on that


 
Posted : 03/11/2015 3:47 pm
Posts: 0
Free Member
 

You weren't going to mention it? What was this then?.

Well ok, I mentioned it.

Nevertheless, I'm still interested in your analysis?


 
Posted : 03/11/2015 3:52 pm
Posts: 0
Free Member
 

poisonspider

Well ok, I mentioned it.

Nevertheless, I'm still interested in your analysis?

I believe you're either being slightly facetious or you're looking for something else to try and trip me up on, so I'm not going to really indulge you too much, but I'll say this....

The first thing I look at is geometry. So if thats not to my liking then that's it over. The second thing I look at is dynamics/kinematics, essentially how the bike rides. The simplest way would be a test ride, if that's not possible I'll consider the type of linkage, leverage ratio, curve, shock and tune and try to figure out how it might ride and the best way to do that is to compare it to a known quantity like your current bike.

In terms of the Capra I (personally) would rule it out straight away based on geometry. I know I don't like it (a medium Capra would be 10mm shorter than my current bike), so no need to go further. Assuming they revised it, well then I'd be interested. And since it's a Horst link and that's my favourite set up and I've had 6, then I'd be fairly confident it would be to my liking.


 
Posted : 03/11/2015 4:03 pm
Posts: 728
Free Member
 

These Capra owners are a touchy bunch!


 
Posted : 03/11/2015 4:06 pm
Posts: 0
Free Member
 

Hob Nob

These Capra owners are a touchy bunch!

I actually got chased by a guy on one after I tried to crack a joke about it 😀

(well when I say chased, he chased me up a hill till I dropped him, then he chased me down a trail...till I dropped him)


 
Posted : 03/11/2015 4:11 pm
Posts: 33980
Full Member
 

The bike snobs are far worse!

Grum, go for a medium, short stays make it manouvre, not tt length,im sure it's not too late to change the order!

I met a Nomad owner who apologised for having one, before if said anything


 
Posted : 03/11/2015 4:17 pm
Posts: 728
Free Member
 

The bike snobs are far worse!

Dunno, it's like some kind of brand specific inverse snobbery.

I ventured into the Pinkbike post about them when my wife briefly considered one - it was mostly full of lunatics (even by Pinkbike standards).


 
Posted : 03/11/2015 4:25 pm
 grum
Posts: 4531
Free Member
 

kimbers according to their size guide I should be on a small? I am usually borderline between S and M on most bikes but always sort of wished I'd got a small Pitch.


 
Posted : 03/11/2015 4:26 pm
Posts: 0
Free Member
 

These Capra owners are a touchy bunch!

Honestly, I'm not being touchy, I don't care if people think they're the worse bike ever made (clearly they're not), everyone has their own tastes, priorities, depth of pocket etc. There wouldn't be so many options if every one thought the same.

In fact I ought to discourage people from buying one, I quite liked it being uncommon, but hey-ho.

The simplest way would be a test ride, if that's not possible I'll consider the type of linkage, leverage ratio, curve, shock and tune and try to figure out how it might ride and the best way to do that is to compare it to a known quantity like your current bike.

I think this is my issue. And again I'm not trying to trip anyone up etc but this is just nonsense.

Suggesting you can calculate the leverage ratio, curve and implications of shock tune etc just by looking at it is ridiculous! To then say you can translate that to a completely different bike where all these variables will be different and work out how it will ride is ludicrous.

Why do companies spend £1000's with data loggers, making incremental changes to all these variables, using pro level riders who are capable of exploiting the differences the tiny changes make to help tune a design, if it was as simple as looking at some dimensions on the drawing board and then comparing to the bike they rode in on.

The only sensible thing you said there was, the best way to tell is ride one, and I agree wholeheartedly with that.

I am prepared to accept you may have a wide and varied background in riding bikes of all sorts of shapes, sizes and designs and that that has provided you with more insight than your average rider. You may very well be able to predict the difference between the handling on a four bar, faux bar, single pivot, VPP, DW link etc.

But, and it's a big but, I defy anyone to be able to say about any modern MTB, that this bike will ride like a pig and that one won't, simply by looking at the static geometry numbers. There's simply too many variables.


 
Posted : 03/11/2015 4:27 pm
Posts: 14711
Full Member
 

The Spesh Enduro is very tempting. Aluminium, 29.5lbs, Pike & Cane Creek, 11 speed etc and very reasonably priced compared to the Capra etc. Command Post and brakes would probably get swapped for a Reverb and Shimanos but apart from that it looks spot on.


 
Posted : 03/11/2015 4:32 pm
Posts: 653
Free Member
 

I'm 5'7" and for me the having relatively long legs the medium Capra with a 40mm stem is a great fit.


 
Posted : 03/11/2015 4:32 pm
Posts: 0
Free Member
 

poisonspider

Suggesting you can calculate the leverage ratio, curve and implications of shock tune etc just by looking at it is ridiculous! To then say you can translate that to a completely different bike where all these variables will be different and work out how it will ride is ludicrous.

Which is why I said "try" and to use something you know and relate to, like your current bike in order to make as good an approximation as you can. If I'm spending thousands of pounds on something online I'll do as much as I can to understand what I'm buying.


I am prepared to accept you may have a wide and varied background in riding bikes of all sorts of shapes, sizes and designs and that that has provided you with more insight than your average rider. You may very well be able to predict the difference between the handling on a four bar, faux bar, single pivot, VPP, DW link etc.

Well thank you, very gracious.

But, and it's a big but, I defy anyone to be able to say about any modern MTB, that this bike will ride like a pig and that one won't, simply by looking at the static geometry numbers. There's simply too many variables.

I can tell exactly what I like and what I don't like based on the geometry. I just happen to like a long tt and have been chasing longer and longer tt's for years, for the most part this is what the industry has been doing so I'm not too far off the mark.


 
Posted : 03/11/2015 4:33 pm
Posts: 0
Free Member
 

I just bought a 2015 Kona Process 153 DL for £2500.

Get a 153, its long, slack and such a sweet ride!


 
Posted : 03/11/2015 4:36 pm
 grum
Posts: 4531
Free Member
 

I guess I'm much less of an expert but I'm amazed that anyone can write off a bike based on a 1cm difference in TT length.

I'm 5'7" and for me the having relatively long legs the medium Capra with a 40mm stem is a great fit.

Hmmm, dammit starting to wonder about this sizing now. I think I have short stumpy legs though.

kimbers chainstays are actually slightly longer on the Capra than the Pitch so is it going to be less manoeuvrable? Stop making me think rationally about this you bastards!


 
Posted : 03/11/2015 4:36 pm
Posts: 0
Free Member
 

Which is why I said "try" and to use something you know and relate to, like your current bike in order to make an approximation. If I'm spending thousands of pounds on something online I'll do as much as I can to understand what I'm buying.

But how?

Let's say your current bike has a leverage ratio of 1:2 and a slightly rising rate curve. Now lets say the bike you're looking at is 1:1.9 and a linear curve (assuming that info is even available), the chainstays on the new bike are 8mm shorter and the BB is 5mm lower. The seat angle is 0.5deg steeper and the reach is 10mm longer.

What's the implications of all that? Rides better or worse?


 
Posted : 03/11/2015 4:42 pm
Posts: 23277
Free Member
 


But how?
Let's say your current bike has a leverage ratio of 1:2 and a slightly rising rate curve. Now lets say the bike you're looking at is 1:1.9 and a linear curve (assuming that info is even available), the chainstays on the new bike are 8mm shorter and the BB is 5mm lower. The seat angle is 0.5deg steeper and the reach is 10mm longer.
What's the implications of all that? Rides better or worse?

Yeah, but what colour is it?


 
Posted : 03/11/2015 4:43 pm
Posts: 728
Free Member
 

I guess I'm much less of an expert but I'm amazed that anyone can write off a bike based on a 1cm difference in TT length.

1cm here, 1 cm there, they all add up and can make a big difference to how a bike feels. You don't know if that buyer has already ridden a bike with a similar reach, or slightly longer and found it on the cramped side of things...

FWIW - you being 5'8" on a small, I would say you have ordered the wrong size.

My wife is 5'9" on a large Nomad. Size for size, they are very similar between the Nomad & Capra. A small is going to be dwarf sized. Medium for sure.

The old Pitch used to be quite a long bike, for it's time (in reach).


 
Posted : 03/11/2015 4:45 pm
Posts: 0
Free Member
 

FWIW - you being 5'8" on a small, I would say you have ordered the wrong size.

I'm inclined to agree, I'm 5'9.5" (the half is very important 😉 ) and I got a large. It suits me but I think the small is pushing it for 5'8".


 
Posted : 03/11/2015 4:48 pm
Posts: 653
Free Member
 

On the medium,from center of pedal axle to center seat rail is 840mm at the bikes minimum stock(due to 150mm dropper ) pedaling height-this may give you a gauge to compare with your pitch.My ride height using this is 870mm - ie seatpost is 30mm out of frame.


 
Posted : 03/11/2015 4:50 pm
 grum
Posts: 4531
Free Member
 

Hmmm, I was just going by the recommendations on the YT site, which says up to 5'9 you would want a small. I'm more 5'7.5 than 8 but having second thoughts about the small now, arggh!!


 
Posted : 03/11/2015 4:56 pm
Posts: 0
Free Member
 

poisonspider

FWIW - you being 5'8" on a small, I would say you have ordered the wrong size.

I'm inclined to agree, I'm 5'9.5" (the half is very important ) and I got a large. It suits me but I think the small is pushing it for 5'8".

[i]Gets offended when I criticise his bike, sarcastically dismisses slight differences in geometry as being irrelevant....ignores bike companies size chart and needs to go a size up on bike....advises others to do the same.[/i]

Oh the ironmongery.


 
Posted : 03/11/2015 5:07 pm
 grum
Posts: 4531
Free Member
 

Can we stop all the bitching please? Ta. 🙂

The reach on a medium pitch is 446mm - on a small Capra it's 400 (or 422 on a medium). Hmmm.....


 
Posted : 03/11/2015 5:08 pm
Posts: 0
Free Member
 

Hey it's not you're thread..... 🙂


 
Posted : 03/11/2015 5:09 pm
 grum
Posts: 4531
Free Member
 

It is now! 🙂


 
Posted : 03/11/2015 5:11 pm
Posts: 0
Free Member
 

I'm 5'8" and based on the geo alone i'd at least go for the medium.

However i've also ridden and owned a bike that was similar length and reach to their large so it's possible I could even ride that.

It's all down to personal taste and how you like your bike to fit in the end though.


 
Posted : 03/11/2015 5:13 pm
Posts: 13942
Full Member
 

My mate's 5'8 and very happy on a medium Capra.

If you care about the kinematics, look at this: http://linkagedesign.blogspot.co.uk/2014/02/young-talent-capra-2015.html

It's a good design!


 
Posted : 03/11/2015 5:18 pm
Posts: 919
Free Member
 

If you wade through the posts on Pinkbike you end up realising that if your normally a small you need to buy a medium YT.

So I would buy a Large since I normally ride a Medium.

So yes, you may want to change your order. Getting a frame that's too small wont make it more manoverable, it will just make it too small.


 
Posted : 03/11/2015 5:20 pm
 Robz
Posts: 718
Free Member
 

I'm 5 10 and ride a Large Capra (with 35mm stem). I have ridden medium and it felt too short for me with a 50mm stem. Seat was miles in the air at full extension too.

I love the Capra. Its hands down the best/most capable bike I've ever owned In 22 years of mountain biking


 
Posted : 03/11/2015 5:20 pm
Posts: 33980
Full Member
 

Definitely a medium grum!


 
Posted : 03/11/2015 5:21 pm
 grum
Posts: 4531
Free Member
 

It's all down to personal taste and how you like your bike to fit in the end though.

I like my Pitch but just fancied something a bit shorter/newer/lighter, but then it seems the medium Capra is a reasonable amount shorter anyway.


 
Posted : 03/11/2015 5:28 pm
 DeeW
Posts: 1
Free Member
 

I'm 5'8 1/2". Sat on a large Capra which felt good for length, though I'd have probably got a medium. Would not even consider a small. Issue you might have with a medium Capra is the saddle height being too high with the 150mm reverb depending on your leg length.


 
Posted : 03/11/2015 6:54 pm
Posts: 8722
Free Member
Topic starter
 

Grum, you're Hebden based aren't you? May be cheeky and ask for a quick bounce on the capra whichever size you get 😉


 
Posted : 03/11/2015 7:11 pm
 grum
Posts: 4531
Free Member
 

Cheers DeeW. Yes DBW - no problem. It's gonna be at least a month before I get it though.

I've emailed them to ask about switching to a medium.


 
Posted : 03/11/2015 7:35 pm
Posts: 0
Free Member
 

Gets offended when I criticise his bike, sarcastically dismisses slight differences in geometry as being irrelevant....ignores bike companies size chart and needs to go a size up on bike....advises others to do the same.

Oh the ironmongery.

Firstly, I'm not offended if someone doesn't like the Capra, I'm genuinely not arsed either way.

Secondly, I haven't dismissed the significance of geometry changes. In fact I spent hours constructing a CAD model of the Capra in medium and large sizes to superimpose over my outgoing Orange 5 to see what differences there were. This was more about fit than trying to make a judgement on the ride characteristics though.

Thirdly, the YT website has a disclaimer basically saying sizing is a personal thing at the end of the day so you don't have to listen to us!

Fourthly, my 'advice' (which they are perfectly capable of ignoring) is based on having ridden a large for a year and having briefly had a go on a small. I'd say that's pretty reasonably well informed.

Finally, my issue with what you are saying has always been the premise that you can comment negatively about a bike (any bike not necessarily the YT) based on some bullshit about being able to read a bike's dymanics etc based on the static geometry numbers. Especially when it's couched in a 'I know better than those useless corrupt magazine numpties' attitude.

Now, unless you can convince me you're Nico Vouilloz or Greg Minnaar or similar, I suspect you're just talking your game up a bit.


 
Posted : 03/11/2015 7:35 pm
Posts: 0
Free Member
 

Now, unless you can convince me you're Nico Vouilloz or Greg Minnaar or similar,

How very dare you. Jimjam used to work in CRC. Knows much more than either of those oafs.


 
Posted : 03/11/2015 7:53 pm
Posts: 0
Free Member
 

How very dare you. Jimjam used to work in CRC

I used to work in a petrol station, doesn't make me an expert on cars! 🙄


 
Posted : 03/11/2015 7:59 pm
Posts: 0
Free Member
 

Some very po faced and serious (boring) cyclists on here.

Get a test ride, if you can't then take a punt....that's the joy of bikes, they all ride differently.
So what if the top tube is slightly short....fit a 5mm longer stem and move the saddle back another 5mm.....there you go, you've just gained 10mm more TT.

Some of the comments....'l only ride horst link'.....'l used CAD to superimpose the geometry over my old bike'.....jesus wept, you guys are missing out....seriously.

There are so many good bikes and so little time (and money) to own them all!.....i currently have a DW/maestro but I've had linkage driven single pivot....I'd like to try Horst....I'd like to try VPP....I'd like to try an Orange-5 etc

This thread has descended into another example of why I don't ride with others and am loathe to call myself a MTBer, as a group we really are a sad sad bunch.

Anyway, the Capra looks great....this obsession with having a bike so long you can do very little other than sit in the middle of it like a sack of spuds will pass I'm sure, at the moment marketing is leading design and the cash cow is Enduro so that's why we've got what we've got so to speak.
Be interesting to see who will be the first manufacturer to break ranks and move away from silly short chain stays and ridiculously long front triangles.


 
Posted : 03/11/2015 8:18 pm
Posts: 0
Free Member
 

grum - Member
Very tempted to stick one of those new blue Lyrik Capras on my credit card. I don't even care if it's not that amazing, I just think it looks cool.

Are you sure you know what you're doing? That's a heck of a lot of money just to spend on something that "looks cool"

I'd be drawing it up in CAD/comparing kinematics/checking leverage ratios first.... 😉


 
Posted : 03/11/2015 8:24 pm
Posts: 0
Free Member
 

You know what [i]deviant[/i], you're absolutely right. I agree with you entirely!

'l used CAD to superimpose the geometry over my old bike'.....jesus wept, you guys are missing out....seriously.
😆

(In my defence I only did the CAD thing cos I was crapping it that I'd spunked my money on the wrong size, plus it was a slack day at work)


 
Posted : 03/11/2015 8:28 pm
Page 2 / 5

6 DAYS LEFT
We are currently at 95% of our target!