You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Fox shock from 2016 , where to get the tool for bushing insertion / removal . Cheap as possible of course . Thanks in advance!
This is the proper job (check correct diameter) but you still need a vice.
[url= http://www.tftuned.com/bushing-tool-for-12mm-bushings/p832 ]http://www.tftuned.com/bushing-tool-for-12mm-bushings/p832[/url]
They don't take much pressing. I've used a vice (or vice and socket) alone with no problem.
I think I also used to use two sockets with a long M6 bolt through them. That's probably the cheapest...
Socket + (smaller socket+1/4" extension) + hammer/vice = jobbed 😀
They're about £8 on eBay sometimes including a couple of bushes. Pretty basic but do the job. Happy with mine.
Yeah, get that one. He's a STWist, and General Good Guy Who Gives A Lot Back, if that influences your decision. (no it's not me!)
Cheers all will go with the eBay one to keep it in the Singletrack family .
Offset bushings do one which works well
I have that eBay one and it's great. Not much more to say than that.