Tubeless Conversion...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Tubeless Conversion - Stan's Tape on Non-Tubeless Rims

4 Posts
4 Users
0 Reactions
107 Views
Posts: 435
Free Member
Topic starter
 

In the past I have used Stan's rim strips on really old wheels, but I am sure I have also done this on some wheels sets going back 10 years plus with just Stan's yellow tape, and regular tyres. However Stan's Website says - DON'T DO THIS. Overcautious?

Wheels are Ritchey WCS Alu disc - probably about 7-8 years old (on a Boardman)

Yea or Nay?


 
Posted : 06/05/2021 11:47 am
Posts: 780
Free Member
 

I say try it.

Before I got UST wheels on both bikes I always used Tesa 4289 tape which is basically a cheaper version of Stan's. Never tried it with non tubeless tyres though.


 
Posted : 06/05/2021 1:01 pm
Posts: 11402
Free Member
 

got a set of hope hoops on dt5.1 with stans yellow tape from about 2010 been faultless run every tyre i've thrown at them ust, tr & some real old floppy paper thin spesh non tubeless.


 
Posted : 06/05/2021 2:06 pm
Posts: 435
Free Member
Topic starter
 

Thanks, guys - its not the tyres I'm concerned about though. I have many many non tubeless tyres running this way. It's is there something about the rim that could be an issue? Again, I don't think so - I am fairly sure I have done it to other rims older than this which I do not think were designated 'tubeless' friendly, but I do not have any to check now.


 
Posted : 06/05/2021 2:24 pm
 atbr
Posts: 0
Free Member
 

it sounds like it should work. you are just sealing the rim. 1 inch gorilla tape is working really well for me and its cheap.


 
Posted : 06/05/2021 2:27 pm

6 DAYS LEFT
We are currently at 95% of our target!