 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Running nobby nic 2.25 Evos non-tubeless with Stans fluid on Rovals fitted to my Yeti 575.
Attempting the WHW at the end of April- will be carrying a couple of tubes and patches in my bag, will also clean the tyres and put fresh fluid in..
I've heard there's some very large water bars for hopping/pushing over on the route and just wondering if there's any point sticking with the tubeless- had them set up like that almost a year with no problems at all..
So- pita or just stick with the current setup?
Ta.
you'll prb die, so good luck and make sure you set up a STW trust fund
If you do flat, you put a tube in - what's to worry about?
Hang on - I'd forgotten about the tyre shredding midge of Lochaber............
Will put my affairs in order before I go then..
Edit- the whatnow??? 😀
I've heard there's some very large water bars for hopping/pushing over on the route and just wondering if there's any point sticking with the tubeless
The fact there are water bars is reason enough for staying tubeless!
Yeah, go tubeless and find a nice cushy pressure, the extra suspension and traction on the climbs is worth it! I actually managed to scrabble up a few of the switchbacks* on the Devil's staircase running tubeless rubber queens somewhere between 25 and 30 p.s.i.
*before common sense and lactic took over...
No, I ran T/L on a HT. View from the top of the Staircase in the summer.
[IMG] 
[/IMG]
Tubeless it is then.
Fairly shocked you haven't died already. Rovals on a Yeti just sounds wrong.
They seem to be fine. Fairly light, reasonably wide and I got a bargain price when I bought them...
Not sure about the red alu nipples but hey ho.