Truing buckled whee...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Truing buckled wheels....

10 Posts
9 Users
0 Reactions
66 Views
Posts: 0
Free Member
Topic starter
 

So my rear wheel has a slight buckle.

I have a spoke tool but no stand or any previous experience in this.

Have any of you managed to make a stand from bits round the house or just done without?
Other options are to buy a stand which may be useful for the future (not sure how often wheels need truing), or pop down to a bike shop for them to do it (how much could I expect to pay?)

Grateful of any advice please


 
Posted : 07/03/2013 9:16 am
Posts: 0
Free Member
 

Keep the wheel in the bike, upside-down. Use a rubber band to tie a pencil to the seatstays as a guide.


 
Posted : 07/03/2013 9:18 am
Posts: 251
Full Member
 

Just keep the wheel in the frame and use a couple of zip ties on the seat stays to judge where the bits that need moving are.

Like this (use zip ties instead of the brake blocks)


 
Posted : 07/03/2013 9:18 am
Posts: 10333
Full Member
 

bike shop will probably charge £10-£15, but it's good to learn to do it yourself.


 
Posted : 07/03/2013 9:27 am
Posts: 0
Free Member
Topic starter
 

Thank you!
I'm going to have a go at fixing it this afternoon


 
Posted : 07/03/2013 9:37 am
Posts: 0
Free Member
 

Been straightening wheels for 30 years without a stand.
I leave the wheel in frame/forks
blue tack and a matchstick if i am taking my time
brakeblocks if i'm in a hurry

its useful to practice on an old wheel if you can.
Read the guide on Sheldon Brown


 
Posted : 07/03/2013 9:42 am
Posts: 0
Free Member
 

Don't be ham-fisted with it. Take a quarter-turn of each nipple at a time, and don't forget to loosen/tighten opposing spokes (i.e., if you tighten one to pull the rim one way, loosen it's opposite number slightly).

When you've finished, put on a pair of thick gloves and grab a handful spokes before giving them a good squeeze to even things up. The recheck for true and finally give each spoke a "twang" to make sure that you've no very loose/tight ones.


 
Posted : 07/03/2013 9:47 am
Posts: 1417
Free Member
 

There was a (suprisingly good) guide on pinkbike a few months ago about sorting buckles. I don't know how reliable it is but I read it and trued my rear wheel after it got slightly.... spaghettified after being minced down the Ranger Path.


 
Posted : 07/03/2013 9:51 am
Posts: 0
Free Member
 

I used the late great Sheldon Brown guide.

It's one of those skills that once learnt, you'll wonder what all the fuss was about.


 
Posted : 07/03/2013 12:57 pm
Posts: 0
Free Member
 

I used the late great Sheldon Brown guide. I fond his guide so helpful I even e-mailed to thank him, got a lovely reply, and corresponded a little more with him.

It's one of those skills that once learnt, you'll wonder what all the fuss was about.


 
Posted : 07/03/2013 12:58 pm
Posts: 0
Free Member
 

Take a quarter-turn of each nipple at a time

oooooh matron !


 
Posted : 07/03/2013 3:12 pm

6 DAYS LEFT
We are currently at 95% of our target!