The rubbery screws ...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] The rubbery screws for shimano shifters to cover the cable holes??

10 Posts
10 Users
0 Reactions
45 Views
Posts: 0
Free Member
Topic starter
 

Where from, seem to have lost mine and it has lead to rusty cable inners!!


 
Posted : 29/10/2011 7:42 pm
Posts: 33
Free Member
 

I've got loads in my house. Every time I take one out I seem to loose it. Must still be there somewhere.


 
Posted : 29/10/2011 7:44 pm
Posts: 33
Free Member
 

Grub screws BTW.


 
Posted : 29/10/2011 7:45 pm
Posts: 0
Free Member
 

The sram ones seem to be made of cheese, mine are shot.


 
Posted : 29/10/2011 7:45 pm
 dab
Posts: 391
Free Member
 

A dod of silicone sealant will do the trick to seal the hole
Then an old spoke , nail etc to pull out

Worked a treat with SRAM shifters


 
Posted : 29/10/2011 7:49 pm
Posts: 507
Free Member
 

part no. 6CD 3300, cost 99p, and can be ordered from Madison by your LBS who will probably have a few that have been salvaged in their workshop.


 
Posted : 29/10/2011 9:12 pm
Posts: 496
Free Member
 

i just went to the lbs and sasked if they had a spare lying around.

they did 8)


 
Posted : 29/10/2011 9:16 pm
Posts: 5746
Free Member
 

I asked on here and a lovely man posted a couple to me....then the f***ing post office ripped the envelope and just delivered me a torn, empty envelope!

I've stuck some tape over the hole


 
Posted : 29/10/2011 9:22 pm
Posts: 0
Free Member
 

Anyone tried the small plug out of a bic pen?


 
Posted : 29/10/2011 9:56 pm
Posts: 17915
Full Member
 

Blu tac...
That is all...


 
Posted : 29/10/2011 10:14 pm
Posts: 0
Free Member
 

Too small.


 
Posted : 29/10/2011 10:14 pm

6 DAYS LEFT
We are currently at 95% of our target!