 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Topic starter
....which is on the marzocchi website, would that be the same as rake?
With my understanding of rake being the horizontal distance between a vertical line from the headtube and the axle.
Posted : 02/10/2012 12:58 pm
Yes - offset and rake are fundamentally the same thing. Usually the former is used when it is achieved by the fork crown or dropouts being 'off-set' from the centre line, the latter when the forks are bent or 'raked'.
Posted : 02/10/2012 1:14 pm
Topic starter
Thanks Sam
Posted : 02/10/2012 1:15 pm