Specialized Slaught...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Specialized Slaughter first impressions.....

19 Posts
13 Users
0 Reactions
53 Views
Posts: 0
Free Member
Topic starter
 

I was at the Forest of Dean yesterday and found them a bit too Squirmy in the corners tbh. I think they'd be perfect for the loamy stuff..I rode with one on the rear..

How do they compare to the rock razor?


 
Posted : 05/05/2015 11:46 pm
Posts: 0
Free Member
Topic starter
 

bumping up for the evening crowd..


 
Posted : 06/05/2015 5:23 pm
Posts: 0
Free Member
 

Does it feel like the side knobs roll over when lent on hard? That has been a criticism of the Butcher.


 
Posted : 06/05/2015 5:36 pm
Posts: 0
Free Member
 

It is a variation on the Rock Razor idea of slick down the middle with decent side tread isn't it?....I believe Maxxis are developing a Minion with similar pattern tread.

Great in dry dusty trails, great on hard pack.

.....FoD has been rainy this week hasn't it?

It's not what I'd have run, I have a Rock Razor waiting to go on the back but not until later in the year.

I ran a minion DHF on the back last week at FoD and all was good!


 
Posted : 06/05/2015 6:07 pm
Posts: 0
Free Member
 

Which one? They do a few compounds and few cases in the slaughter don't they?


 
Posted : 06/05/2015 6:16 pm
Posts: 0
Free Member
 

I found it great on hardpack and dusty trails. As soon as it got steep and loose it was a bit sketchy, but I wasn't expecting anything else.

I haven't ridden the rock razor, but I've heard the side knobs break off fairly easily.

The slaughter is a great summer tyre, drifty and fun, but I cannot be arsed with changing tyres for different conditions and venues, so I have gone back to one do it all setup.


 
Posted : 06/05/2015 6:24 pm
Posts: 3
Free Member
 

I've just fitted one on the Stooge rear

Side knobs feel soft - as do the centre ones

I'll get to try it tomoz


 
Posted : 06/05/2015 6:41 pm
Posts: 0
Free Member
Topic starter
 

yes it feels as if the side knobs are rolling over. .I'm on the 29" grid version. ZForest of Dean wad as good a place as any for its maiden voyage. I feel as though the side knobs could do with being a tad shorter as even on hardback they're gonna squirm/ deform.


 
Posted : 06/05/2015 7:17 pm
Posts: 3
Free Member
 

A mag review reckoned you need to commit to get the tyre to work


 
Posted : 06/05/2015 7:58 pm
Posts: 0
Free Member
 

On my second Rock Razor now, soon as I saw them last year I popped one on the rear of my Bronson, when pushing hard cornering the grip is spot on I find, the big side nobs don't tend fold & cause the bike to to squirm around, seen a few tyres come out recently with very similar patterns but i'll be sticking with them albeit the gravity version now, superb fast & surprisingly grippy.

Cheers
Mark


 
Posted : 06/05/2015 11:04 pm
Posts: 28475
Free Member
 

Having just trashed the a bonty xr4 on the front in three rides, are these overkill on the front for mainly XC in the Dales with regular Lakes trips? Was wondering about Trail Kings too.


 
Posted : 07/05/2015 7:21 am
Posts: 0
Free Member
 

They work great of a 30mm internal rim. No sense of side nobs folding.


 
Posted : 07/05/2015 2:32 pm
Posts: 3985
Free Member
 

I found Specialized Purgs were a bit like this when I first started using one on the front. They definitely need you to weigh the front and commit when cornering. Fantastic tyres when you work them out.


 
Posted : 07/05/2015 3:09 pm
Posts: 0
Free Member
 

Was out last night round Troutbeck and Jenkin Crag and it was mostly dry and rocky. The Slaughter grid out back rolls and grips well and it cornered just fine at 52kph. Steep woodsie muds and roots is rarely grippy no matter what the tyre but they were OK. They roll well and I got lots of strava points...
Rode them at the Dyfi last weekend and thought they were perfect.
I don't really ride anywhere very muddy often so they would be fine for most of the year up in the Lakes.
Oh and the shoulder feels consistent when you tip it in.


 
Posted : 07/05/2015 5:03 pm
Posts: 0
Free Member
 

They work great of a 30mm internal rim. No sense of side nobs folding.

Rounded profile then? The Rock Razor looks too square to work on wide rims.

I'm tempted by the LB 38mm rims for incoming my Reign.


 
Posted : 07/05/2015 6:29 pm
Posts: 0
Free Member
Topic starter
 

Tomaso...what pressure were they?


 
Posted : 07/05/2015 6:53 pm
Posts: 0
Free Member
 

Tom_W1987

I run Roval fattie carbon Sl's 30mm wide & find the razors spot on, seems like there's been quite a few manufacturers jump to produce a similar tyre, can send a picture of the spread on the rear no worries.
Highly recommend the gravity version.


 
Posted : 07/05/2015 10:54 pm
Posts: 1085
Full Member
 

maybe if dry but found whenit got steeper and looser i couldnt brake as effectively


 
Posted : 08/05/2015 8:20 am
Posts: 0
Free Member
 

28psi but I suppose thats only half the equation! I am about 14 stone


 
Posted : 08/05/2015 9:09 am
Posts: 0
Free Member
 

I'll second what [b]tomaso[/b] said, been running the slaughter out back all winter up here in the Lakes and it's been fine, straight line braking isn't their strong point but they do roll well and once in a turn the side knobs do their job, easy to set up tubeless and stayed up tubeless even after i put a big dent in rim.

Just put something else on the rear and already notice how draggy it is compared to the slaughter, will be changing back soon


 
Posted : 08/05/2015 10:14 am

6 DAYS LEFT
We are currently at 95% of our target!