You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
I'm after the bearing sizes for my 06 S-Works Enduro. I'm planning on replacing all 12 bearings but so I can continue to ride want to source the bearings then replace them all at once.
Try the US Specialized site. All the manuals back to 03' (I think) are available there.
I've got a custom made bearing puller/press kit if you're interested?
Got it made at work when I had an '05 Enduro, no use to me now.
It'll do all the bearings in the rocker assy IIRC.
just buy the bearing kit from any Spesh dealer or mail order place that stocks em.
At £40 it's cheaper than buying individual cheap bearings from most bearing suplliers and you get good quality bearings too.
kaesae will sell you some. He might have 'tested' them in a jar of water for a month first though.
I'd be interested in that bearing pull/press set if the other chap isn't
(Apologies for crashing the thread)
Back OT - BETD offer the best quality bearing kits for the money IMHO.
The other cheaper sets are just poor.
A bearing dealer will be able to get everything you need but not for £40 as they are all narrow bearings, not used in many other applications.
Go BETD.
Just in case you're struggling to find the bearing sizes you'll need:
2 off 28x15x7mm - 6902 RS
4 off 19x10x5mm - 6800 2RS
6 off 24x15x5mm - 6802 RS
😉
Tinc - I'll try and find it in the shed somewhere. You can have for the cost of postage. I'll email you.
In my experience, it's worth getting full complelemtn bearings for suspension pivots. Greater load capacity and remember, that pivots don't spin, they rock!
That's jolly decent of you PoisonSpider, thanks! Just let me know.
Email addy in profile. 🙂