[Closed] show me your 29+ front bikes please!

Sorry it's not a very good picture.

Almost as smooth as when it's got a fatfront on but quite a bit quicker on the climbs.

[url= http://farm8.staticflickr.com/7369/8729462712_c529975f8a_z.jp g" target="_blank">http://farm8.staticflickr.com/7369/8729462712_c529975f8a_z.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/stu-b/8729462712/ ]20130511_104256[/url] by [url= http://www.flickr.com/people/stu-b/ ]multispeedstu[/url], on Flickr

[url= http://farm8.staticflickr.com/7323/8726937666_07bdefbe9e_z.jp g" target="_blank">http://farm8.staticflickr.com/7323/8726937666_07bdefbe9e_z.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/stu-b/8726937666/ ]Rabbit Hole rim and Knard tubeless for the Jones.[/url] by [url= http://www.flickr.com/people/stu-b/ ]multispeedstu[/url], on Flickr

Thanks stu - did you get a complete wheel with surly hub? Thinking about pro2 evo for flexibility...
Did you do anything special to set it up tubeless?

Surly hub? 😯

No mate it's a Whub. 🙂

Gorilla tape and a bolt in vale for tooblessing.
All the Surly rims work dead easy like that.

[img] [/img]

Tazzy, is that a Black Sheep?

Bloomin lovely whatever it is 🙂

yep a sheep, with a torus/burls Ti fork, 29 x 3 fits lovely with plenty of space.

Upgraded to a rabbit hole since this picture

[img] [/img]

Sorry no photo but would be worthwhile checking the fork width. I've got one in my swift fork mounted on a P35 rim and there is only a couple of mm clearance on each side of the tyre. It's fine for my testing purposes as a stepping stone to fat front but i'm not sure it would be much use in the winter with whatever 29+ nate equiv surly release.

29front with salsa cro moto forks you say.....

[IMG] [/IMG]

old steel kona unit with a mix of parts from the shed

All parts were originally on this on specialized

[IMG] [/IMG]

OK so what is 29+

OK so what is 29+

50mm rim and 29x3" tyre.

OK so what is 29+

At the moment, as far as i'm aware, it's Surly's Knard tyre and nowt else. Fits on a 29er rim but is about 3" wide and as a result is relatively high volume. Knard at low pressure works nicely on rigid fronts to provide a bit more cushion.

Ron Jeremy - that looks like standard 29 in a 26 cro-moto?

Taz - what is the width between the blades on your forks please?

Thanks all

Gota.

They might fit on a standard 29er rim but that's kind of missing the point of a 3" tyre. 😉

Oxy,

Yep had a 29 wheel and a 26 fork, so just thought I'd see if it works and it does and rather well too

Stu - fair point and worth clarifying; building a wheel up from scratch a rabbit hole would definitely be the way to go. In my case it was just a test since i had the p35 built up and i'm patiently waiting for a jones test ride.

I've been considering 29+ in my DT Swiss rigid fork (which has dimension similar to Tazzy's Ti fork by the looks of it; plenty of room).

If anyone is upgrading to a Rabbithole wheel and wants to sell their P35 rim or complete wheel (on a 100mm hub, no Jones hubs please!), drop me a msg.

Giant XTC Composite and Pace 445mm forks.
[URL= http://i1117.photobucket.com/albums/k581/willberesford/101.jp g" target="_blank">http://i1117.photobucket.com/albums/k581/willberesford/101.jp g"/> [/IMG][/URL]

Anyone know if 29+ is feasible with an On-One Carbon fork?