 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Topic starter
Hello,
Just doing a service on my Revs, (Dual air RLT 140mm)
On the spring/non drive side, in the upper tube - the manual says just grease the o-rings and to use no oil.
However when I opened it up there was oil in there.
So what do I do,
15 wt
5 wt
grease?
Any help is appreciated 🙂
Posted : 07/03/2013 12:31 pm
Bit of grease and bit of oil (a v.small amount) fully synthetic 15wt if you have any.
Posted : 07/03/2013 12:34 pm
Wot Loco said. 5ml of oil above and 5ml below the air Piston makes them feel lovely IMO.
Posted : 07/03/2013 12:56 pm
Topic starter
brilliant cheers guys 🙂
Posted : 07/03/2013 1:00 pm