Roof mounted carrie...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Roof mounted carrier for carbon frames

9 Posts
9 Users
0 Reactions
75 Views
Posts: 0
Free Member
Topic starter
 

Should I be worried about damaging a carbon frame with a traditional fame clamp type carrier?
Anyone got any experience of something like this as an alternative: [url= http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_953291_langId_-1_categoryId_165477 ]Halfords[/url]


 
Posted : 01/03/2014 9:36 am
Posts: 0
Free Member
 

Mine is currently above my head doing 60mph so fingers crossed.


 
Posted : 01/03/2014 12:22 pm
Posts: 17209
Full Member
 

I've used my Thule 591 to clamp my carbon road bike with no issues - then driven right through France at 80mph. Since it holds the (very oversize) downtube top and bottom, there is not a lot of pressure on the tube. I would avoid the ones that use leverage to clamp the sides of the tube, however, as I think these can damage tubes if overtightened. The 591 is perfect.


 
Posted : 01/03/2014 12:37 pm
Posts: 65918
Free Member
 

ChrisL of this parish has had his Mojo on a 591 many times with no issues, same with my old C456. I'd definitely suggest some helicopter tape on that area though- in fact, on any bike, as trapped grit will damage the finish over time.

Asking the manufacturer might be a good start but my gut feeling is, if it's not strong enough for the not-massive clamping force, it's not strong enough to be a bike.


 
Posted : 01/03/2014 1:20 pm
Posts: 0
Free Member
 

I use a Thule 561 fork mounted carrier, totally avoids any contact with the frame and in my opinion is far more secure.

Worth a look.


 
Posted : 01/03/2014 1:23 pm
Posts: 17209
Full Member
 

Till you leave the front wheel in the garage/car park 😉
My tandem carrier is fork mounted. I much prefer the 591. I'd also question it being more secure, given the 591 clamps frame and both wheels.


 
Posted : 01/03/2014 1:33 pm
 Haze
Posts: 5392
Free Member
 

Fork mounted here, though I have taken a mates carbon as far as the Alps on a 591 without much drama.

The front wheel flapped around in the wind a bit and eventually wore away the tyre shoulder (one of those separate coloured sections), obviously not a problem with the fork mounted carriers.


 
Posted : 01/03/2014 7:12 pm
Posts: 32265
Full Member
 

591s here - several carbon framed road bikes transported at 70mph plus on motorways with no obvious issues so far.


 
Posted : 01/03/2014 7:29 pm
Posts: 0
Free Member
 

I bought one of these last week and adapted it to fit on my existing bike rack

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_920677_langId_-1_categoryId_242557.

I didn't get one like the photo, but a new version that is lockable.


 
Posted : 01/03/2014 7:40 pm
 Jase
Posts: 27
Free Member
 

I've always used 591's but recently got a 561 to use on my carbon road bike, feels much more secure (not that I wouldn't use a 591) so were prefer the 561 everytime.


 
Posted : 01/03/2014 8:49 pm

6 DAYS LEFT
We are currently at 95% of our target!