You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
I am waiting on an in-shop delivery for the Reverb (2016 model). However, I see I can get a price match and pay £110 more (£310 in total) for a Thomson elite. I am mainly concerned with reliability so will I get that with the Thomson ?
Thanks
No. Get a bikeyoke revive instead.
+1 for BikeYoke Revive.
Ive got a reverb on one bike and a brand x on my other bike
If i ever have to replace the reverb it will be with another brand x dropper
Reverb costs £200+ with a 2 year warranty, once out of warranty they cost £90 to be serviced by the likes of tf tuned
The brand x costs £90 with a 2 year warranty, once it dies after 2 years of use just go buy another one
Ive also had a specialized irrc dropper and a ks lev
The brand x beats them all!!!
That Bikeyoke looks very nice https://m.pinkbike.com/video/475798/
If a bit pricey for the 185mm I’d like.
I have a reverb and a Thomson on my bikes.
I much prefer the Thomson and I know Alex off here is the same. It’s a lovely piece of kit. We haven’t really had them long enough to comment on reliability though.
You’ll definitely need to ditch the crappy remote it comes with if you do go for it.
We have run both and are now moving over the the revive.
The reverb is repairable but spares are expensive (top cap). The Thomson is a over action but has to be sent away for any and all issues which we had more than our fair share of.
I’ve had a Thomson and have a Reverb. Thomson is a far superior product imo, very highly recommended. The operation, fit, finish and reliability are another level to the Reverb from my experience.
+ 1 on the revive
Managed to get a 185 dropper on a frame that I had a 150 reverb slammed on the clamp.
I've got two- or is it three - Thomsons and a Reverb.. Until a couple of months ago, I've have said Thomson every time, but my Covert has started creaking badly at full extension. Drop the post for ten seconds then raise it again and it stops for a few minutes then comes back. It's had a fair bit of use, but seems like a recognised issue and a warranty job to fix.
My Reverb is first generation and has had a lot of hammer. I wore out all the bushes and the pins, but it was an easy enough job to service and it's been fine since.
On balance the Thomson is a nicer thing and has a quality feel to it, but it's not flawless and it's not user maintainable if your'e that way inclined. I'm not sure that's much help, but there you go.
Managed to get a 185 dropper on a frame that I had a 150 reverb slammed on the clamp.
Out of interest, are post sections that are inserted into the frames similar lengths?
I run a 410/150mm Reverb with about 20mm from collar to top of seatpost and fancy a 185mm Revive, but the top pivot point for the shock lives in the seat tube right under the thingymajig.
If the Revive is longer than the Reverb I’m not sure I’d get away with it.
Dimensions here:
https://www.bikeyoke.de/en/seatpost-revive-185-31-6.html
Looks like about 290mm.
Sacki the designer is really helpful if you email him.
I recently specced my new Bird Zero with a Reverb Stealth. Swopped it out after 2 rides to a Fox Transfer with a Wolftooth remote. I have the same setup on my FS and prefer everything about it over the Reverb !
Agree that the Transfer is better than Reverb. If Thomson came in black i’d Have one over either of the others though.
To he'll with the colour, Thomson need to make tools, bushings and keyways available. I can live with a sealed cartridge but a fully sealed unit that DOESN'T keep the crap out is just BS!