Roadbike Gearing?
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Roadbike Gearing?

13 Posts
10 Users
0 Reactions
77 Views
Posts: 2265
Full Member
Topic starter
 

I'm heading to the Alps with the roadbike in a couple of months time and was looking to fit an 11-32 cassette in place of the current 11-28 that's on the bike.
The bike currently runs 11 speed Ultegra with a short cage mech and a compact chainset.

Could I get away with running the 11-32 with the short cage mech as long as I'm not cross chaining?


 
Posted : 12/07/2015 10:44 am
Posts: 41395
Free Member
Posts: 33
Free Member
 

Technically yes but I wouldn't risk it personally. 34-28 should be plenty low enough, it's not steep out there it just goes on forever.


 
Posted : 12/07/2015 10:49 am
Posts: 41395
Free Member
 

neilsonwheels - Member

Technically yes

How?


 
Posted : 12/07/2015 10:52 am
Posts: 0
Free Member
 

28 will be fine with a compact. The hills are long, but generally not too steep. Of course there are steep sections, but you'll manage those ok.


 
Posted : 12/07/2015 10:55 am
 Haze
Posts: 5392
Free Member
 

As above, 28 should be plenty...


 
Posted : 12/07/2015 10:57 am
Posts: 33
Free Member
 

How.?

As long as you don't use the the biggest sprockets at the back you be fine. You can fit a 11-32 but it will be no use to man nor beast.


 
Posted : 12/07/2015 11:11 am
Posts: 41395
Free Member
 

[s]Useless[/s] interesting logic 😐


 
Posted : 12/07/2015 11:33 am
Posts: 33
Free Member
 

😀


 
Posted : 12/07/2015 11:36 am
Posts: 23277
Free Member
 

It's less about the chain length and more clearing the cassette. A longer b tension screw and winding it right in might get you a bit more. Or use a MTB mech. I'm running an xt that copes with a 32 cassette fine.

I can ride up hills just fine on a 28, but I'm faster spinning on a 32 even though it doesn't feel it, you'll certainly feel the benefit at the end of long days as well.


 
Posted : 12/07/2015 11:36 am
Posts: 7167
Full Member
 

A few newer bikes in our road club are running 11-28 and some riders dont like the gaps . As for Alpine rides , unless you are doing multiple passes on the same day you should be oK with a 34/28.
The climbs only steepen on the hairpins and mostly the gradients are 8 or 9% . They just go on for hours .
Try and spend a few hours hill repping before you go , or deliberatly choose a lumpy route to build some leg strength before you go.

In my limited experience the tdf climbs seemed easier as they had count down boards with distance and gradient . The lesser known ones were tough as no info on how steep or how far was left ( no garmin )


 
Posted : 12/07/2015 12:31 pm
 aP
Posts: 681
Free Member
 

I've just come back from the Maratona and was ok with 34/29. The only thing about having significantly lower gears is that you just spend more time riding up the climbs - unless you're carrying luggage when lower gears make perfect sense.


 
Posted : 12/07/2015 3:50 pm
Posts: 0
Free Member
 

Not done any of the big alpine climbs but those on Majorca (Sa Calobra, Puig Major, etc.) are just a case of getting a gear that seems slightly too easy at the bottom and just sticking with it as there's rarely much of a change in gradient. Sa Calobra's basically 6% with a short section of about 8% for instance, I think I did it in 34/22 which was nice and steady, only getting out of the saddle to provide a bit of rest for the muscles.


 
Posted : 12/07/2015 4:39 pm
Posts: 126
Free Member
 

Plenty of newcomers to our club get by perfectly well on 34/28. Extremely light fellas do alright on 34/32.
I'm going to fit a 27 for the first time ever for the Pyrenees, I think it'll be sweet.


 
Posted : 12/07/2015 5:56 pm

6 DAYS LEFT
We are currently at 95% of our target!