You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Now that I've become semi-competent at bike maintenance, I've decided it's time for me to confront my final challenge - wheel building. Well, wheel-truing to be more precise.
Being an engineer (electronic) I very much like to have decent tools. Being a Scotsman I don't want to spend a huge wad of cash.
So what would the STW lurkers recommend? I've discounted the idea of building one myself owing to time and material shortages.
Looking forward to some suggestions.
Thanks. That book should be handy, but think I'd rather avoid building a jig to be honest. As mentioned, I don't really have the time to be sourcing the materials etc...
Use one of these;
http://www.parker-international.co.uk/11798/Park-Tool-TS8-Home-Mechanic-Wheel-Truing-Stand.html
and cheaper here
happy with it, works ok, flip the wheel to check dishing, feels solid and stable. Make sure you get a decent spoke key too.
[url= http://www.ukbikesdepot.com/products.php?plid=m72b16s364p1172 ]Minoura True Pro 2[/url]
Thanks for the Minoura tip. My googling had uncovered the Minoura Pro Wheel Stand, but I couldn't find one for sale anywhere. I guess it must have been replaced with that one you've linked to. Seems like a pretty good set-up. Same ballpark price as the Park one too.
Hmmm, which one should I go for....
I work in a bike shop with a wheel truing stand similar to the Minoura one (specifically, a Park jig). The problem with the design is that the indicator fork isn't very good to sight with i.e. it's not so easy to judge fine trueness. The wheelpro design is much better, although the photo above doesn't show the longer parrallel sighting surfaces.
Or use an engineers clock gauge on a bought stand, which is what I do.
just use the frame of a bike (bang it in the reat dropouts) or turn a pair of old forks upside down in a vice and use those
Decided to go for the Minoura True Pro 2 - and if anyone else is following this thread with interest, rosebikes.co.uk are going the stand for £71.85 posted, a good £15 less than anywhere else I could find.
Thanks again for all the suggestions. I'm off now to find out what an engineers clock gauge is 😉
I notice that the Minoura stand isn't suitable for 15mm or 20mm axles? Does anyone know if there there any similar stands that will cater for all axle types, or is there a workaround?
you can buy or make through axle to normal QR axle shape so you can use normal stands
Dr_Brakes - that was a concern for me, but fortunately all my 15mm and 20mm hubs have QR adapters. I think some of the more expensive jigs have posher centraling mechansisms. Actually, the Park tool linked to above looks like it might work with most hub types...
The stand shown in the above photo (by uplink) will handle 15/20mm front hubs plus bolt through rears without the need for any additional adapters. It's what I use.
My Wheelpro stand cost £1.55. Thank you Roger. Great book, Great stand.
Can't beat the park ones IMO... Got mine on American eBay for much cheapiness, though through axle adapters and adjustable base were extra costs... $260 all in if I recall 🙂
wheelpro FTW