Topic starter
My wife's 2020 Scott Spark RC Pro BB is on the way out. On the last three press fit frames I fitted a BB too I went with Hope as they have the screw fit centre tube to tie the cups together.
On the Spark RC the BB is 92mm but Hope only do the press fit cups without the tie tube. Is there anything else worth a look? 30mm axle crankset.
Posted : 23/03/2022 7:54 pm
I've found RF bottom brackets to be less cross comparable than others.
I couldn't use a RF BB with my FSA cranks. YMMV
Posted : 23/03/2022 8:43 pm
