 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Topic starter
Do i cut it at the same angle as the stem which has a rise or just chop it straight?
Posted : 20/12/2013 5:34 pm
Cut it straight, no different to an alloy steerer with a 'straight topped' stem clamped to it.
You need a few mm of clearance between the top of the steerer and the top of the stem as usual, to allow the top cap to load the headset bearings.
Posted : 20/12/2013 5:42 pm
Topic starter
Cheers
Posted : 20/12/2013 5:42 pm