You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
I'm looking to get some carbon CX forks for the steel CX'er to lighten up the front end a bit.
I've seen these over on Aliexpress...... http://www.aliexpress.com/store/product/26er-carbon-mtb-bike-fork-disc-brake-T700-carbon-fiber-3K-or-UD-glossy-finish/408575_765990538.html
They are marketed as an mtb fork 26/29er but i'm unsure if they'll be suitable due to angles/offsets, etc as i don't want to change the current set up too much if possible?
The offset and length are the parts i'm most concerned with.....
offset = 38mm
length = 460mm
Any help/advice gratefully received.
cheers
Look like Hylix - very stiff.
Length might be a bit long, can't remember details.
Length might be a bit long
Yup, looks like you're right Al, a bit of googling seems to point to a length of around 410mm axle-crown and a rake/offset of 45ish degrees.......back to the drawing board 🙁
If youre on a budget, I think Massi or similar light alloy 26" forks go on ebay cheap.
Planet X Uncle John forks only £49 at the moment.
[url= http://www.on-one.co.uk/i/q/FOPXUJCC/planet_x_uncle_john_carbon_cyclocross_fork ]http://www.on-one.co.uk/i/q/FOPXUJCC/planet_x_uncle_john_carbon_cyclocross_fork
[/url]
Planet X Uncle John forks only £49 at the moment.
cheers for the link but they need to be disc i'm afraid
Have tried those Massi before, they are alu with carbon wrap, really stiff and the odd off-set messes up the steering even on a MTB.
Would stick with some steel ones like the Kaffenbacks if you can't find any cheap carbon.