[Closed] pike dual position bottomless tokens uk supplier ?

Have you asked LoCo?

I got ones from Maverick suspension in USA which are genuine rockshox ones machined with o-rings fitted to go on the central shaft, I would highly recommend them.

I cant ger 3 of these for £40 POSTED they seem to just sit in place due to an interference fit, what sort of price were the maverick parts andy ? thanks
no I have not been on here much so out of touch

Another vote for the Maverick Suspension versions, great instructions too!

Maverick ones came to something like £40 incl postage from the USA

Ouch, £40 for some bits of plastic to displace some air. Please say there is something more realistically priced.

They are $39 + postage (£25) - considering they're custom made and the forks cost £500+ that is not exactly a huge outlay surely.....

Got mine from aebike.com for $30 delivered for 3 genuine tokens and they came within a week with no customs issues/cost.

You could even get a few orders together to reduce postage costs

Mavericks are out of stock by the way

any rock shox/sram dealer?

Is there a file on GrabCAD, or do you already have it? Can't you just get someone on here to print them? What's the material requirements?

Have you asked LoCo suspension?

I think you'll find the ones on aebike.com are not custom made for dpa Pikes. If you look at previous threads about this I'm sure there was a UK company doing it, but when I spoke to them they insisted on fitting them themselves.

I think you'll find the ones on aebike.com are not custom made for dpa Pikes

[url= http://www.aebike.com/RockShox-Dual-Position-Air-Bottomless-Tokens-35mm-Qty-3_p_83833.html ]http://www.aebike.com/RockShox-Dual-Position-Air-Bottomless-Tokens-35mm-Qty-3_p_83833.html[/url]

It appears they are out of stock, but mine are definitely the genuine RS parts fitted to my DPA Pikes and working perfectly.

11.4018.032.004

I used this part number to find them.

thanks for all your help and advice . anyone got a link for loCo website /contact details thanks

using that part number i found a german website listing these labelled as dual position ! http://www.hibike.com/rock-shox-spare-part-suspension-dual-position-air-pike-dpa-bottemlesss-token-spacer-35mm-3-pcs-a1-p7642cb68b651b3f08ee63f7556c1e750

with that part number should any lbs with a sram acaount be able to order these ? thanks

19b 11.4018.032.004 Bottomless Tokens Qty 3 PIKE Dual Position Air
[img] http://www.mtb-news.de/forum/attachments/dpa-token-jpg.404604/ [/img]

ordered ! job done fingers crossed they are correct but at that price for 3 for a tenner wont shed tears if there wrong !
Rock Shox suspension spare parts Pike DPA Dual Position Air Bottemlesss Token spacer (-es) 35mm (3 pcs.) A1 (# 22637469) 1 kit 13,78 € 13,78 €

thanks again all for help 😀

It suggests at least a 2 week wait though when most other stuff to order seems to be 6-9 days

[url= http://www.gabelprofi.de/en/RockShox/Spare-Parts/Pike-DPA-Bottemlesss-Token-Spacer-35mm-3-Stueck-A1.html ]http://www.gabelprofi.de/en/RockShox/Spare-Parts/Pike-DPA-Bottemlesss-Token-Spacer-35mm-3-Stueck-A1.html[/url]

These guys appear to think they can't get any until November so there might be some wait.

That's cheap! Maybe I have missed something but it looks like Rockshox are now making them for DPA Pikes so no need to get custom ones made. About time too!!

yes it looks that way ! still cant find them on a google search in the uk maybe someone wsill start stocking soon as the dual position pike is specced on lotsof bikes .

i will let you know how long it takes to arrive thanks

Anyone seen somewhere that doesnt charge as much as the damn tokens to ship? Or does anyone need some as i am going to put an order in to a german store for some.

Have seen these listed on the drawings but not listed in UK yet, will give the supplier a case tomorrow for an eta. We do have the 32 & 35 mm soloair tokens and topcaps in stock though.

Cool, will keep an eye out for what you come up with.

If not am tempted to buy a few sets and whack em on ebay. A lot cheaper than the previous options from the USA.

I did spot they also sell an air shaft for all models that allows you to change the fork length - eg one that changes the 150mm 27.5 DPA to 160mm for only 25 euros so might get one while they are available as I tend to look after my forks and keep them for a while if I like them (currently running 2007/8 rev dual airs that have lasted a couple of frames but now out of fashion - 26" and QR).

We can supply the Dual position lower air parts too, (would have to check price and availability depending on specs. wanted)

Have just spoke to Sram uk looking a month or two until the DP tokens are available.

i got some here
http://www.hibike.co.uk/rock-shox-spare-part-suspension-dual-position-air-pike-dpa-bottemlesss-token-spacer-35mm-3-pcs-a1-p7642cb68b651b3f08ee63f7556c1e750
13 euro for the pack of 3

Pike DPA Bottemlesss Token Spacer 35mm (10 pcs.) A1
Item# 22637468 || EAN/UPC: 710845770692 || Mfg item# 11.4018.032.005
We expect at least 2 weeks for this item to become available. You may order this item; we inform you by mail as soon as we have new information about this item. (As of: 26 Oct 2015 at 06:10pm)

I was really wanting to order from gabelprofi linked above, but the site seemingly has now secure payment method. Even trying via PayPal gives an error as PayPal wants to use https.

Scratch that, it lets you do it if you keep going through with the sale for some reason.

Anyway, gabelprofi have them in stock apparently, and the site said available for delivery between 28th October ans 31st October. That will do me. Yeah, dhl delivery cost more than the tokens, but, such as life.

anyone managed to buy these small items yet?
only place i spot them is hibike

Loco - any luck on your month or two?

Also would these fit any date Dual Air Pike?
Or just manufactured after a certain date?

9 month bump 😀

Anyone sourced the tokens (11.4018.032.004) in the uk? Easy to fit and work as should?

Ordered and received mine last week.

I was doing a service on the lowers anyway so figured it was a good time to try some out.

Fairly easy to remove the top cap and rod then just slide the tokens on. Not sure if having the lowers off made this easier though.

Just checked Amazon and the UK seller I used isn't listing them anymore 🙁

Thanks acid...sound easy enough to install, just got to source some

I think Ive got some in the workshop. Not back there until Friday though. Drop me a mail ben@birdmtb.co.uk?

Thanks Ben...I'll send you an email 😀

Hi,

I bought some tokens a while ago but as my forks were new I didn't want to take them apart to fit them.

They are now ready for a clean. Can anyone give me some tips?

If Ben can't help you out then give me a shout. Not able to get them out to you for another week but did have an advert selling them at what they cost me buying in bulk as I could not get hold of them individually at the time.

Damascus,

The service guide on the sram website is pretty handy.