One bust spoke - wi...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] One bust spoke - will I die?

15 Posts
15 Users
0 Reactions
82 Views
Posts: 0
Free Member
Topic starter
 

Just seen that my commuter/hack bike has one loose, bent spoke on the front wheel (26inch). It's an old bike.

My head says it's ok since so many spokes there next to it. It's only to be ridden on city rodes and the odd path.

Is it safe? What do people reckon?

Thanks..


 
Posted : 14/11/2017 6:51 pm
Posts: 24
Free Member
 

You'll not die. Yet.


 
Posted : 14/11/2017 7:06 pm
 gt56
Posts: 0
Free Member
 

You might not die, but your chances are increased.. From personal experience one broken spoke gives about 20 minutes of riding before wheel implosion.. Quickly becomes way out of true and brake pads rubbing etc. Get it sorted there's a reason the spokes are equally distributed


 
Posted : 14/11/2017 7:08 pm
Posts: 10333
Full Member
 

You will die. But one broken spoke won't kill You!


 
Posted : 14/11/2017 7:12 pm
Posts: 65918
Free Member
 

First time I went to Fort William I noticed a broken spoke as I was putting my bike on the train. Couldn't find a straight pull in fw so I just went riding- full day on the chairlift and another day razzing around the forest later and the wheel was fairly unround but it didn't cause any bother. Put a new spoke in it when I got home, trued it back up, kept on using it for 4 more years.


 
Posted : 14/11/2017 7:39 pm
Posts: 0
Free Member
 

If you have disc brakes you'll do better than rim brakes as the wheel will tend to go out of true faster with uneven tension caused by one broken spoke.

If it's a typical 32 spoke 3-cross wheel and you aren't hammering it (kerb drops, big potholes etc) then it's going to stay rideable quite a long time (probably) but you should certainly be planning spoke replacement soon. It's a quick and easy job if you get a replacement of the right sort of length (LBS should be able to tell you what size you need if you show them the wheel). It's probably going to take longer to remove the wheel and take the tyre off and refit it than it will take to refit a single spoke.

Plenty of reasonable guides online, all you need is a serviceable spoke wrench.


 
Posted : 14/11/2017 7:52 pm
Posts: 27
Free Member
 

I ran an MTB wheel for 2 years with a spoke missing.


 
Posted : 14/11/2017 8:07 pm
Posts: 6219
Full Member
 

I'd suggest that the front wheel of a commuter bike doesn't get really badly stressed, in the grand scheme of things. You'll be fine and it will not lead to your immediate demise.

I have occasionally run Alpine reds with a missing rear spoke or two. Not ideal but I replaced them ASAP. I'm 100kg.

Replace the spoke when you can, it's a really easy job.


 
Posted : 14/11/2017 8:25 pm
Posts: 0
Free Member
 

You'll be fine for a while but get it sorted or the rest will break earlier. It's a quick easy job as long as rotors and cassettes aren't seized on.


 
Posted : 14/11/2017 8:34 pm
Posts: 119
Free Member
 

Is the Spoke snapped or just loose ?

If loose and bent just tighten it back up

If it’s snapped at the head end just remove it from the nipple and fit a new one , this can sometimes be done in the bike


 
Posted : 14/11/2017 8:41 pm
Posts: 5559
Free Member
 

I would ride it but fix at the soonest opportunity

Certainly found wheels with snapped spokes and never been that certain how long it has been snapped


 
Posted : 14/11/2017 8:50 pm
Posts: 15068
Full Member
 

It'll be fine in the short term.

However the longer you ride it could cause other issues down the line, so get it replaced and retentioned reasonably soonly.


 
Posted : 14/11/2017 9:00 pm
Posts: 810
Free Member
 

pulled a spoke through the eyelet of the rim about 9 months ago when the rear mech got caught in the wheel. Been riding it off road 2-3 times a week since then with no issues.


 
Posted : 14/11/2017 10:42 pm
Posts: 4132
Full Member
 

I ran an MTB wheel for 2 years with a spoke missing.

In my 2nd year now, on the rigid singlespeed. I’ll report back at the end of winter.


 
Posted : 14/11/2017 11:12 pm
Posts: 0
Free Member
Topic starter
 

Cheers for the replies - made me look at it last night.
Whilst the spoke felt it would fall out because so loose and bent, I did manage to tighten it and it seems ok for now. Think the whole wheel could do with a tighten I guess


 
Posted : 15/11/2017 6:13 am
Posts: 24332
Full Member
 

I ran an MTB wheel for 2 years with a spoke missing.

Knowing you have that sort of tip top maintenance regime remind me never to buy anything second hand off you


 
Posted : 15/11/2017 6:20 am

6 DAYS LEFT
We are currently at 95% of our target!