New drive chain - c...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] New drive chain - chain length

10 Posts
10 Users
0 Reactions
75 Views
Posts: 271
Free Member
Topic starter
 

Finished building up the new bike last night.

fitted the chain with the usual big cog - chainring method and added two links + the power link.

One thing I didn't do was compress the suspension whilst fitting.

Will I burst into flames on the first ride?

 
Posted : 15/04/2021 10:21 am
Posts: 28475
Free Member
 

Depends how much chain growth your particular bike produces.

12s in general is quite fussy about chain length/b screw

https://dansbikeblog.com/article/how-calculate-correct-chain-length-shimano-12-speed-drivetrain

 
Posted : 15/04/2021 10:27 am
Posts: 10225
Full Member
 

This also depends which 12 speed drivetrain you’ve fitted. Shimano has one way of sizing detailed in their user guide, whilst Sram have a different way (on full suss it has to be sagged to the position where it has most chain growth).

 
Posted : 15/04/2021 10:29 am
Posts: 5012
Full Member
 

Let the air out the shock and see what it’s like.

 
Posted : 15/04/2021 10:39 am
Posts: 11961
Full Member
 

Let the air out the shock and see what it’s like.

Obvious advice is obvious.

 
Posted : 15/04/2021 10:49 am
Posts: 3551
Full Member
 

Shimano 12s is definitely different, as above. With 10/11s I've always let air out of shock, fully compress, big/big, add two links. But the chain was far to long on the Mrs new bike. So went with the normal but uncompressed and it's fine (like the above link actually).

 
Posted : 15/04/2021 11:22 am
Posts: 2324
Full Member
 

Slight variation on this theme - if i change from a 32T 12Sp Eagle chainring to a 30T chainring - How many links should i take out of the chain? 2 (1 wide/1 narrow) or 4?

 
Posted : 07/05/2021 3:36 pm
Posts: 699
Full Member
 

Slight variation on this theme – if i change from a 32T 12Sp Eagle chainring to a 30T chainring – How many links should i take out of the chain? 2 (1 wide/1 narrow) or 4?

Well, you've gone from 16 teeth forward of the BB to 15. Everything else is staying the same, except a tiny angle change. I'd start with keeping it as it is. If it's too long then take out one pair of links.

 
Posted : 08/05/2021 12:12 am
Posts: 2324
Full Member
 

@luket thanks - will give it a whirl

 
Posted : 08/05/2021 3:23 pm
Posts: 10333
Full Member
 

Drive train....

 
Posted : 08/05/2021 10:05 pm
Posts: 4324
Full Member
 

Slight variation on this theme – if i change from a 32T 12Sp Eagle chainring to a 30T chainring – How many links should i take out of the chain? 2 (1 wide/1 narrow) or 4?

I did just this last night on my wife’s bike. Using SRAM’s wrap around and overlap by 2 method I took out a complete link (one narrow, one wide). I didn’t try it before shortening so don’t know if it would have been OK or not.

 
Posted : 09/05/2021 9:47 am

6 DAYS LEFT
We are currently at 95% of our target!