Multitools with CO2...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Multitools with CO2 adapters, any good? Any experiences?

5 Posts
4 Users
0 Reactions
57 Views
Posts: 0
Free Member
Topic starter
 

Looking for a CO2 pump and came across this.
http://www.leisurelakesbikes.com/p/12866/cannondale-6-function-mini-toolwith-co2-inflator

Anybody use one or similar as can't seem to find any reviews.


 
Posted : 11/05/2014 8:21 am
Posts: 0
Free Member
 

Not seen one of these before. The multitool side of it looks a bit compromised. Think I'd rather just get a decent multitool and a separate air chuck.


 
Posted : 11/05/2014 8:35 am
Posts: 0
Free Member
 

I'm not quite sure what you're saving by combining the CO2 canister nozzle onto the multitool. The CO2 setup I use has a very small separate nozzle and it works fine and only cost about £5 off ebay with three canisters.

With this option it seems to me there are better multi-tool options and better separate CO2 canister options.


 
Posted : 11/05/2014 8:39 am
Posts: 0
Free Member
 

Just imagine its cold wet and windy and you are trying to fiddle that multitool onto your spindly valve. Then release the gas in a controled method.
[img] [/img]


 
Posted : 11/05/2014 8:42 am
Posts: 0
Free Member
 

+1 for one with an easily controllable gas release, especially for road use when it's an emergency repair with a reused glueless patch and a makeshift tyre boot 🙂


 
Posted : 11/05/2014 8:53 am
Posts: 0
Free Member
Topic starter
 

Cheers will take a look on ebay.


 
Posted : 11/05/2014 2:47 pm

6 DAYS LEFT
We are currently at 95% of our target!