Last last year I bought a cannondale slate with a rigid lefty. I noticed at the time that the fork seemed to have mounts for a mudguard but no amount of googling brings up anything. There’s a mount at the dropout and also a hole in the crown. Does anyone know what these are for if it’s not a mudguard? Be great if there was a mudguard for it!
[url= https://i.ibb.co/yWbHwh9/F80237-E1-A9-DC-4-A5-B-A977-15-D69286-F4-EC.jp g" target="_blank">https://i.ibb.co/yWbHwh9/F80237-E1-A9-DC-4-A5-B-A977-15-D69286-F4-EC.jp g"/> [/img][/url]
[url= https://i.ibb.co/yQp3FmC/4-A31-E9-F1-1-D4-C-426-B-8-EB5-A73-E9-B7251-A5.jp g" target="_blank">https://i.ibb.co/yQp3FmC/4-A31-E9-F1-1-D4-C-426-B-8-EB5-A73-E9-B7251-A5.jp g"/> [/img][/url]
Could do with one.
Not using the fitting you describe but an SKS shockboard, with a (seperate) adapter will fit. Previous owner of one of mine had stuffed a piece of rubber tube up the headtube (think a section of thick rubber hose) and the sks adapter fitted inside that.
It would be a LOT easier with a second fork leg.
Nothing useful to add other than to compliment you on the quality of your slabs, woodwork and delightful cladding. Not a paving crack weed in site. Small fence could do with a lick of paint but it does compliment natural aging of your cladding. 9.5/10
