You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Velcro strap cut into 5 equal lengths or different lengths?
Strap is 80cm so was going to cut into 5 x 16cm lengths, but it says something about ensuring an overlap around forks etc which made me wonder if some lengths should be longer?
Why not wrap around the fork first, then cut?
The enclosed amount is overkill.
I'd be impressed if you're still using 5 bits after a month. 3 is probably fine. Cable ties will come you way eventually. And a craft knife so you can make a clone for your other bike.
Great little bits of plastic imo.
Me thinks your over thinking attaching an ice cream tub lid to some tubes
Velcro strap cut into 5 equal lengths or different lengths?
don't like reading instructions i assume?
Abandon velcro, use cable ties, is how I do it.
it doesnt say in the instructions thats why I asked 🙄
also as I am obviously over-thinking it... logo up or logo down for a more stealthy look?
I've fitted mine with the velcro and it's very secure. I had longer lengths around the fork legs than the brace. I just wrapped it around the fork leg with a couple of centimetres overlap and cut 2 strips this length.Then cut remaining velcro into 3 equal strips for the brace. Simple and it's a brilliant mudguard. Better than the neo and importantly, keeps the stanchions clean 😀
The instructions should be on the underside of the fender on a sticker.
IIRC The two stantion lengths should be 30mm overlap, the remainder (over the fork brace) 3 equal lengths.
Get the stantion bits on first loosely, then the other three with the velco soft side toward you beloved paintwork, as tight as you like.
Done, cut 2 bits at 19cm and the other 3 at 14cm.
Looks ok and doesn't spoil the look of the bike too much.
I had my first ride with mine yesterday and must say I am very very impressed. At first I thought something was wrong because as i rode down a fire trail there were lots of little tings turned out to be loads of little stones hitting it. I had never noticed little stones being flicked up on this bit of trail, just goes to show how much it is likely to stop being flung up.
As a bonus to not getting a muddy face I also didn't get muddy fork seals.
cable ties, they just work
b r - Member
cable ties, they just work - on your paint work
ftfy
Just fitted mine
Exactly as Organic355 said looks good but I need to try it out yet, i'am looking forward to tomorrow night now!
Kryton - been on 6 months, no marks
Instructions say 5 identical strips but I know the ones around the brace don't need to be as long and I ended up cutting more off
Rubbish rubbish things. Anyone wants one, i have one i've not quite binned yet.
weeksy - you have mail 😀
3 straps, cut in-situ. Cracked mine when a stick got lodged twixt fender & tyre.
All yours mate. FoC. enjoy
Got mine, fitted easily. Great little product.
Or a cut down 2 litre milk container.
I have fitted these to all our demo bikes and I find zip ties less fiddly.
Great product. It was our production the year.
Fitted one of these last week and i'm impressed, not usually a fan of fender style mudguards but this manages to be minimal enough not to bother me. Previously had rrp neoguards fitted for years but did notice the build up of crap on the fork brace and around the seals so decided to try the mucky nutz, simple but effective and very reasonably priced (yes you could make one but thats the same with the neoguard).
Interested to see what mojo/fabien barel have been working on, the protos i've seen look a bit odd and i read somewhere (can't remember where so take with a pinch of salt) a quoted price of over £50!
Other than being better for your fork seals, how do they compare to RRP Neoguard?
Cheers
catch the mud better than a neo. You only need to look at how close the sit to the front tyre. No room for the mud to travel upwards..pretty much all gets caught by the guard
Great product - even better when you print out a copy of it from tinterweb, trace and cut out of a sheet of poly prop you have hanging about.
..it's only £7!!
Considering the cost of most bike parts, these are a steal! Rode through some truly grotty mud yesterday and didn't foul the wheel at all. I used to suffer really badly with crud flying into my eyes and stubbornly refused to wear glasses, so these have been a revelation.
Oh, and cable ties as mentioned above.
mojo5pro - Member
..it's only £7!!
POSTED 1 HOUR AGO # REPORT-POST
No - it was free 🙂 - 7 quid to go towards something else
Well, I trust you gave them a small donation for nicking their idea and design 😉
Bought one, well got someone to buy me one as a present (free postage at bike mongers too). Yes I could make one but credit where credit is due for the originality and not taking pi$$ with the pricing in the first place. Great cheap gift idea.
Will probably photocopy it in case I rip it off and wreck it and want to make out of a different plastic but not going to rip off their design and make my own from the outset.
Great product. It was our production the year.
I bought mine form charlie and it was cheaper than going straight to Mucky Nutz.
They are brilliant wee things, the only time any of my bikes ever goes out without one is when it's got a bigger mudguard on.
Anyone else found the white ones seem a wee bit brittle btw? I've had 3, 2 black ones and one white and the black ones are going strong but the white one cracked after not a lot of use.
To bring this back from the dead.... is anyone's guard failing apart?? Mine's looking a bit worse for wear after the Enduro last weekend, various cracks and a chunk missing - no idea how/when it happened either 😕
my white one did... Managed to break a black one in a decent sized crash, it somehow got folded into the wheel.
The front edge of my black one has got a chip and crack in it after only a ride. Not particular rocky or loose so god knows how its happened.
I've had another on the hardtail for a couple of months which is still going strong after riding in all conditions.
Awesome bit of kit, great service from both Mucky Nutz and Uberbike components during a blip with first one all resolved now well recommended!
Works really well when combined with a crudcather. However, it does make a racket when they make contact with each other when the fork is fully compress when turning.
all very well until you find yourself ground to a halt from it clogging with mud/leaves/twigs and need to remove it 😉Northwind - MemberAbandon velcro, use cable ties, is how I do it.
Just procure yourself a Poking Stick, or if you're particularily concerned carry one with you.
TBh I've only had an issue with that a couple of times, and I reckon the fork would still have blocked up anyway.
Clogging up isn't my problem its the noise from the odd leaf that gets stuck on the tyre. Mine has also cracked at one of the front velcro holes. It's coming off and I'm going back to the between the stantions type things, which as well as being quiet and less prone to cracking also keep me cleaner (when going >20 on wet trails the MNs still let spray up in your face.)
Don't cut into 5 equal lengths if you have 55's - you'll end up with at least two bits that are too short 🙁
Quite possible to underthink this simple task.
NW you obviously aren't riding type of mud I'm talking about :-\
Dbl post
It's v simple...Take the length of velcro and wrap it around the leg of the fork, leave 30mm extra and cut. Cut the next bit the same length for the other leg. Then for the brace, again wrap the velcro round it and leave extra 20mm then cut 2 more lengths the same size. Job done 😀
all very well until you find yourself ground to a halt from it clogging with mud/leaves/twigs and need to remove it
I always have an old toothbrush tucked in with my tools which is handy for unclogging things, and an old toothpaste tube to use as a tyre boot.
Wonder if I could make an emergency dustcap from the lids?
GW - MemberNW you obviously aren't riding type of mud I'm talking about :-\
TBH mate I tend to avoid it, it's crap. But point I'm making is that the wee fender bender isn't any tighter around the wheel than the fork arch, I've clogged the fork without the mudguard just as badly as I have with so I don't reckon it's the issue.
Don't be silly 🙄
fork arch is a 1" bar, the fender creates a huge funnel
Aye, silly of me to draw conclusions based on my own experiences, must be losing it...
Sure, the fender is a little bigger at the entrance, but does that make any practical difference? Doubt it very much, unless you have a coating of mud 6 inches tall on your tyre. The width is identical.
Why on earth are you defending it so profusely?
You already admit to never riding thick sticky mud strewn with leaves and twigs.
My exact experience was my front wheel grinding to a halt every couple of revolutions, requiring clearing ad nauseum, I then removed the fender and carried on fine.
Its a good fender for puddles, wet trails and less thick, sticky mud.
You know what, it's not worth the hassle when you're in this sort of weird mood and inventing things to try to provoke an argument. Night night.
How bizarre! Is my honestly, and the realisation you are actually wrong really that difficult to deal with?
Oh, well.. Sleep tight Xx