Moonglu wheel build...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Moonglu wheel build - quality?

10 Posts
9 Users
0 Reactions
178 Views
Posts: 0
Free Member
Topic starter
 

As per the title, anyone got any experience on the quality of Moonglu's wheel builds?


 
Posted : 02/12/2013 7:57 pm
Posts: 0
Free Member
 

I wasn't very impressed the quality of the rear on mine. After 3 days riding in the Alps on a brand new wheel, only 4 spokes had any tension at all. I'm surprised it didn't collapse. That was a Hope Pro 2 and Stans flow. The front seems fine though and after the rear being rebuilt with a new rim by them and me upping the spoke tension a bit more, they're both still being hammered on the hardtail.


 
Posted : 02/12/2013 8:00 pm
Posts: 0
Free Member
 

I had a couple of spokes come loose on a Stans 29er ArchEX rear after about 200 miles of tame XC. When I ordered the wheels the Moongtu guys were working crazy hours building up the wheels, perhaps quality took a dip as a result ? They offered to take the wheels back and re-true which was great of them but I just got the spoke key out and tweaked it myself.

I've read lots of stories of happy customers so perhaps myself and the previous poster were just unlucky.


 
Posted : 02/12/2013 8:04 pm
Posts: 13356
Free Member
 

Never had a wheel built but I've heard more good stories than bad, in fact the previous post is the only bad one!
Good guys in Moonglu though.


 
Posted : 02/12/2013 8:08 pm
Posts: 6902
Full Member
 

V impressed here - been running a set of pro2s on an arch and a crest that moonglu built 2 yrs back. Absolutely spot on to this day.

Wouldn't say I hammer them exactly, more give them a firm seeing to. Main bike, Peak riding, hefty rider.


 
Posted : 02/12/2013 8:09 pm
 ffej
Posts: 0
Free Member
 

Mine (Stans Flow on Hope Pro IIs) are still true after about 4 years and a few thousand miles. No complaints here.


 
Posted : 02/12/2013 8:09 pm
Posts: 0
Free Member
 

To be fair to the guys, they did sort me out when I got back, though. Even though it looked like I'd been trying to destroy it from the dents due to running a tubeless tyre a touch too low.


 
Posted : 02/12/2013 8:12 pm
Posts: 0
Free Member
Topic starter
 

Cheers guys, sounding good for me to pull the trigger on this then.

That's christmas sorted for me!


 
Posted : 02/12/2013 8:13 pm
Posts: 0
Free Member
 

Been running a Moonglu Arch/Hope wheel set for 3 years on my main bike. Never missed a beat and still true and well tensioned.

I would not hesitate to get Neil to build me another set.


 
Posted : 02/12/2013 9:30 pm
Posts: 417
Full Member
 

Two sets here DT 240s on Flow Ex and Pro2 s to BOR no problems at all.
Wouldn't hesitate to recommend Neil / Moonglu


 
Posted : 02/12/2013 9:48 pm
Posts: 2139
Full Member
 

Arch EX/Hope about 9 months old now, has been down Stiniog on a hardtail and some fairly clumsy riding around the stanes and lakes, among others with never a spoke key needed. I'd buy again. The custom coloured rim stickers look pretty tempting too.


 
Posted : 03/12/2013 12:22 am

6 DAYS LEFT
We are currently at 95% of our target!