 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Topic starter
Morning,
Having a mare with a gxp crank that wont come off, now i've had it off this morning already~(not like that). The internal 8mm bolt and external 10mm threads are fine....and the 8mm is backed off, but not removed It's stuck on the splines i think.
Any suggestions?
Posted : 27/02/2017 10:13 am
Topic starter
nvm,..got it, self extracting. 😳
Posted : 27/02/2017 12:12 pm
more of a bump than I know exactly what to do ... have had a few time consuming experiences with these - ?if 8mm is backed off but crank still on splines does that mean need to retighten 8mm and double check the cover that it presses against is properly in place?
[bump]
Posted : 27/02/2017 12:13 pm
all it took was 32seconds of non input 😆
Posted : 27/02/2017 12:14 pm