Middleburn cable oi...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Middleburn cable oilers and GT85

6 Posts
4 Users
0 Reactions
56 Views
Posts: 21461
Full Member
Topic starter
 

Just how much do you get in the housing compared to how much sprays around the outside or back in your face? Is there anything better than GT85 to squirt in there?


 
Posted : 18/08/2012 11:39 am
Posts: 4267
Full Member
 

I find the GT85 straw fits in perfectly and I don't get any spay 😀 except the run out from the end of the cable of course.


 
Posted : 18/08/2012 12:01 pm
Posts: 21461
Full Member
Topic starter
 

I wonder if It's my straw or my oilers that are at fault then?


 
Posted : 18/08/2012 12:24 pm
Posts: 0
Free Member
 

You have got the right size oiler, haven't you? They come in 5mm & 4mm & should be a pretty tight fit on the outer cable.

When you move the rubber seal out the way, you should be able to see the inner cable through the hole and then make sure you're pushing the straw all the way in. As JT says, the only spray you should be getting is from the end of the cable.


 
Posted : 18/08/2012 1:19 pm
Posts: 21461
Full Member
Topic starter
 

Yep, 4mm with sp41. I can see the hole. Have them angled to access the hole easily.


 
Posted : 18/08/2012 1:24 pm
Posts: 605
Free Member
 

Strange - works fine for me with no spray aside from the cable ends. Great little system.


 
Posted : 18/08/2012 1:42 pm
Posts: 21461
Full Member
Topic starter
 

I even cut the straw to give a fresh end in case it was damaged.


 
Posted : 18/08/2012 1:49 pm

6 DAYS LEFT
We are currently at 95% of our target!