Is it possible to s...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Is it possible to service a singlespeed freewheel (think it's a shimano type)?

3 Posts
4 Users
0 Reactions
106 Views
Posts: 32
Free Member
Topic starter
 

My Langster is dragging awfully, is there anything to be done or do I have to replace it?

BB


 
Posted : 21/02/2010 2:25 pm
Posts: 0
Free Member
 

i just squirt a load of duck oil into it,, if it doesnt get any better throw it in the bin and pay another £9.00 for a new one,,

or go and pay £60 odd for a white bros one as they can be rebuilt,,


 
Posted : 21/02/2010 2:37 pm
Posts: 6317
Free Member
 

Don't buy Dicta ones, they last no time. Shimano ones are way better for less than 15 quid.
If you need to clean yours soak it in diesel or something, wash and dry it and soak it in oil. EP90 is thick or use lots of m/c chain lube. It will then run silently as should any freewheel.


 
Posted : 21/02/2010 7:46 pm
Posts: 17366
Full Member
 

Lay it on its side, squirt some WD40 in, give the wheel a spin, and lean it over so the crap can come out.

Then lay it on its side again, and dribble some decent oil into it. Oil it weekly.


 
Posted : 21/02/2010 8:37 pm

6 DAYS LEFT
We are currently at 95% of our target!