 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Hi,
Does anyone have any experience of the Industry Nine Gravity wheels? I was about to buy a set of Deemaxes but I procrastinated and the I9 wheels caught my eye!
With a 21mm internal width, I'm just wondering if the Deemaxes are too narrow these days. Or am I worrying about nothing on the basis that various WC racers use them?
If anyone has any positive/negative views about either I would be keen to hear...
Thank you
Anyone?
I'm using industry 9 hubs. The 3 degree pick up is great. I'd buy them again for sure.
Their wheels look great but I imagine getting spare spokes could be a pain. I always think going for something with regular spokes is a better idea, you'll always be able to find a spare that'll fit (even if not a perfect match) when on trips.
Thanks Sam. Out of interest do you find their rear freewheel noisy when compared to other hubs? I've heard they've got a distinctive sound from the pinkbike review.
I don't really get what 3 degree/120 point engagement actually means. I know a lot of hubs are around the 40 point engagement mark. Presumably its just less effort to turn the cranks?
The 3 degree thing means the freehub picks up almost instantly after free wheeling, rather then having a little gap before so. Most noticeable on half pedal stroke stuff on tricky climbs.
Because of this they have a more bee like noise. A smidge quieter (but only just) than a hope hub but more frequent clicks from the multiple point of engagement. Much louder than my AM classic hubs on my other bike.
Ahh that makes sense - thanks, they do sound good, sounds like a great benefit to get faster acceleration.
Actually though I think both wheel sets will be better than what I currently have on my dh bike. Still have a 16 year old hope bigun on the front, it must weigh a ton! Not much better on the back, hence looking at i9/deemax.