 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Do you need one on the drive side?
yes - 1 on drive side 🙂
[img] 
[/img]
unless you're using an e-type front mech in which case it's no spacers at all. 😉
right off to the shed!!
Or it's an old Cotic Soul, they needed two.
its a new ragley with 73mm shell
I stand by my statement 🙂
Just the one Rob
just done it 🙂
Well done sir 🙂 Now did you face the BB, Chase the threads, Grease the threads, Grease the axle, Grease the splines, use a torque wrench to 12-14nm 😉
Now did you face the BB - no
Chase the threads, - no
Grease the threads, yes
Grease the axle, yes
Grease the splines, yes
use a torque wrench to 12-14nm yes
I thought 73mm had to have a spacer on each side.
Only joking RR 😉
quirrel ...you're wrong!
quirrel ...you're wrong!
Bugger.
Going to have to take mine apart again and take off that unwanted spacer on the drive side that appears to be doing nothing adverse.
It's supposed to be on the drive side but notion the non drive.