 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Anyone seen shims for HT2 type axles? I have a Raceface chainset on which the spline tapers wore out - they're fine if you narrow the BB and tighten them up so that they bottom out but that means there's some side to side play. I just need some 0.5mm or similar shims to replace one of the 2.5mm spacers so that I can get it just right. Or shims to use on the axle (so 24mm ID) which I guess would achieve the same.
Cassette spacers work on HT2 BBs.
Still a bit wide though - I need to be able to fine tune the number of washers between 0 and 2.5mm - I'm reckoning 0.5mm shims would be about right.
If you can get hold of some shims that come with BB mounted chain devices like the e13 xcx they tend to be thinner.
Ah, that's a good idea.
Hope do a 1mm one.
I also got a metal spacer that is about 0.5mm thick with a PF30 BB kit. Don't know if they are available separately though.
I guess I could be lucky with a 1mm spacer. Or maybe I could sand one down to 0.5mm