how to make mud les...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] how to make mud less muddy

9 Posts
7 Users
0 Reactions
67 Views
Posts: 0
Free Member
Topic starter
 

I have been digging a new track recently. it starts off amongst the trees and the dirt is quite nice an loamy but the further down it goes it emerges into the open the mud gets claggier and claggier... so by the bottom your tyres are a just a slick clay hoop with zero traction, sometimes even jamming the wheel.

im not interested in a smooth built weatherproof motorway, i want it to be a quite organic rut track with lots of turns to slap, but is there anything i can do to improve the lower turns? i was wondering whether it might be worth raking in a bag of mulch?

or is it just a case of giving it chance to dry out a bit? i did purposely start it when the weather man told me we were in for a dry spell, but its pretty much been subject to a constant deluge...!


 
Posted : 30/11/2020 11:56 am
Posts: 8527
Free Member
 

Drainage is always the issue, if it's a big wide area, there's not much you can do. Mulch won't achieve anything.


 
Posted : 30/11/2020 12:06 pm
Posts: 5164
Free Member
 

As above, drainage is key, only other option is weatherproofing the track, or stick on some mud tyres ;o)


 
Posted : 30/11/2020 12:13 pm
Posts: 21461
Full Member
 

Adding water will also make it less muddy but possibly not much help unless you can keep it there.


 
Posted : 30/11/2020 12:16 pm
Posts: 11961
Full Member
 

As above, you either have to drain the water from the track or build the track out of weatherproof materials.


 
Posted : 30/11/2020 12:24 pm
Posts: 6980
Full Member
 

If you dig down does the ground get better? If so, lots of digging or lots of wheels over it could work


 
Posted : 30/11/2020 12:29 pm
Posts: 11961
Full Member
 

If you dig down does the ground get better? If so, lots of digging or lots of wheels over it could work

Only if the water can drain away. If you end up with a rut filled with water, it'll quickly turn into a rut filled with mud.


 
Posted : 30/11/2020 1:02 pm
Posts: 17915
Full Member
 

North shore!


 
Posted : 30/11/2020 1:40 pm
Posts: 8527
Free Member
 

Lol! aye, get sawing!

Joking aside, sometimes raising the level up is the only option, we've a lovely descent off an escarpment locally, looking out over the Firth of Clyde. One section was always a bit boggy, but the increased erosion made it bigger and bigger. Fortunately there's an old millwheel quarry nearby, 2 days spent filling a 20 metre section with big rock, and it's worked well since, must be 8 or 9 years ago.

You may not have that option nearby, sadly.


 
Posted : 30/11/2020 1:55 pm
Posts: 6980
Full Member
 

thols2
Free Member
Only if the water can drain away. If you end up with a rut filled with water, it’ll quickly turn into a rut filled with mud.

Being on a hill, gravity may be able to help with that issue


 
Posted : 30/11/2020 3:15 pm

6 DAYS LEFT
We are currently at 95% of our target!