 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Can anyone point me in the direction of a list of all the tools Hope make for servicing their kit please?
Can't seem to find one.
Cheers that's helpful but was more looking for what's available separately.
Thought there might have been a list of individual tools on the Hope site or something that i couldn't find.
What are you looking to work on specifically?
Hubs- Pro2/Pro2Evo/Pro4 with different freehubs.
BB's
Cranks
Brakes-Tech4 V4
I've never bothered with specific tool before but noticed individually bit's I've seen aren't that expensive.
After a quick look around it looks as though you have to Google all the tools separately (I did find the one below):
https://r2-bike.com/HOPE-Crank-Set-assembly-Tool
Google all the tools separately
That's exactly why I'm looking for a list of individual tools.😉
As I said I can do most stuff without but looking to make life easier.
good link that to the kit -
ive almost all the hubs and tbh most of the brakes since 2004 and various versions of the headsets and bottom brackets .... could be a good investment over time.
Like stu ive just made do in the past and got it done - the last bb92 i fitted i just used a big bolt with double nuts on the other end. and ive done similar for the larger caps pistons in the past for changing seals but nothing does beat the real tools.
hope dont sell and make all the tools, quite a few 3D printed tools exist on ebay (bleed blocks / individual piston pushout spacer etc) that are brilliant for bleeding brakes.
the lubes they use are as follows;
- delphi lockhead dot 5.1
- Hunter silicon lubricant (pistons)
- MOBILGREASE XHP 222 Lithium Blue Grease
You can get the files for those 3D printed tools from Hope...
https://www.hopetech.com/open-source-tools/
Thanks Simon.
That's brilliant.
No worries 🙂