 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
I've got the circlip off but struggling to remove the pivot, it pushes out but buggered if i can get it to move!
Help please 🙂
Mine needed some persuasion on one side. The bushing was pretty mangled and jamming up the pivot.
Little grub screw on the inside of the lever, think there's some exploded diagrams on the Hope site.
The grub screw is for the "Evo Tech cam pin" not the main lever pivot,
[url= http://www.hopetech.com/wp-content/uploads/2014/03/2014TECH3MCYLexplodedview.pdf ]Diagram[/url] so I pressume I just need to press or push it out somehow.
Thanks
No, that grub screw has to be loosened to remove the lever pivot, look at the drawing it shows the groove in which the grub screw locates.
Sometimes they can be a little stiff so you may have to wiggle the lever up and down as you push it out.