 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Topic starter
am trying to remove cranks, have removed the 10mm and 8mm screws and the washer...at this point i thought the non drive arm would just fall off, then the drive side and spindle would slide out
but the ND side is solid and not budging
HELP!
Posted : 15/08/2012 6:52 pm
screw them back on, then back the 8mm off this will use the 10mm as a puller.
Posted : 15/08/2012 7:05 pm
Topic starter
GLAD I WASNT BEING MEGA STUPID - THANKYOU BOTH!
😀
Posted : 15/08/2012 7:13 pm