Help: 44mm ID Heads...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Help: 44mm ID Headset options

10 Posts
8 Users
0 Reactions
135 Views
Posts: 0
Free Member
Topic starter
 

I need to run taper forks. Anyone able to recommend a cost effective headset for a 44mm head tube kona frame?

I know hope do external cups, however i'm looking to put together a cheaper headset or get a a cheaper top cup (or complete) and a hope bottom cup.


 
Posted : 09/07/2014 3:19 pm
Posts: 4022
Full Member
 

Nukeproof do one that's cheaper than the Hope.


 
Posted : 09/07/2014 3:23 pm
Posts: 14595
Free Member
 

[url= http://singletrackmag.com/forum/topic/44-headtube-and-tapered-forks ]A thread I started..[/url] but didn't follow through on, so can't really tell you anything much, but some of the comments might help.


 
Posted : 09/07/2014 4:00 pm
Posts: 0
Free Member
Topic starter
 

Superstar seem to have a complete one that is out of stock.
Otherwise i'm stuck with hope or a hope base and cheap top end if i can find one.


 
Posted : 09/07/2014 5:42 pm
Posts: 1617
Free Member
 

You need Hope 2 for the top and H for the bottom. Not sure I see the point in buying a hope bottom and then trying to scrimp on the top.

As the SS is out of stock this is probably your cheapest option: http://www.chainreactioncycles.com/nukeproof-warhead-44iets-headset/rp-prod85845

I think Gusset do a pick and mix headset too: http://www.gussetbikes.com/products-information.php?id=HDGUBE34

(2nd one and 2nd to last one I think)


 
Posted : 09/07/2014 6:50 pm
Posts: 810
Free Member
 

There is also the on one smoothie mixer? I ended up going for the hope pick and mix headset, wad just under 50 quid with the 5 pound off voucher.


 
Posted : 09/07/2014 7:32 pm
Posts: 0
Free Member
 

Where did manage to get the hope pick and mix for under £50?


 
Posted : 09/07/2014 7:46 pm
Posts: 810
Free Member
 

CRC with the 5 off voucher. Rutland do each cup for 25.99 also


 
Posted : 09/07/2014 8:40 pm
Posts: 1617
Free Member
 

I'd just go with the hope. If you buy a different one you just wish you have bought the hope.


 
Posted : 09/07/2014 9:21 pm
Posts: 507
Free Member
 

Also worth looking at M-Part Elite X44 (available via Madison from your LBS, part no HPT505), for £44.95rrp. We've fitted a few of their headsets as a cheaper alternative to Hope, and had no problems with them. Pretty sure they run the same size bearings as Hope too, so could be upgraded if they wear out.


 
Posted : 10/07/2014 7:37 am
Posts: 4331
Full Member
 

I've put a tapered fork on my Unit, I just kept the OE top cup as it was quite new and got the Hope lower H.

I'll probably get a upper Hope soon, the OE top cup seals let in a lot of shite.


 
Posted : 10/07/2014 8:04 am

6 DAYS LEFT
We are currently at 95% of our target!