You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Looking to fit a headset on a SC bronson. Headset press are really expensive. There are a few cheaper options x tools/ Cyclus but neither seem to do both sizes, or you need 2 tools. Any solutions? Can you use a 1.5 for both? Looking for a simple install at a reasonable price - circa£50 as I’m likely to do a few of these.
Also don’t really fancy the hammer/block of wood option...
My 1 1/8 headset press was adapted with an old headset cup. Nest the headset cup into the larger one and carry on.
I have bottom bracket press that I use on all manner of headset cups no issues
https://www.chainreactioncycles.com/mobile/x-tools-press-fit-bottom-bracket-installer/rp-prod155423
Bought one of these recently based on recommendation off here and very pleased with it, and it won't break the bank.
https://www.bearingprotools.com/products/headset-cup-press
As above - I have a hope bottom bracket press. Seems to fit anything with various bits on it
Interesting that there isn’t a simple cheapish option from x tools or some such as this must be really common. That bearingprotools one looks quite good