Has anyone measured...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Has anyone measured the ERD on Halo Vapour aluminium 650b rims?

8 Posts
5 Users
0 Reactions
88 Views
Posts: 4726
Full Member
Topic starter
 

As above.
Cheers.


 
Posted : 14/02/2015 9:34 pm
Posts: 4726
Full Member
Topic starter
 

Bumpety bump.


 
Posted : 16/02/2015 8:27 am
Posts: 507
Free Member
 

Quoted as 557mm, always found their measurements to be ok.


 
Posted : 16/02/2015 7:03 pm
Posts: 3378
Full Member
 

It is on the Halo site, do you not trust them 😀


 
Posted : 16/02/2015 7:05 pm
Posts: 4726
Full Member
Topic starter
 

Well yes I've seen that but have also read on here more than a few times that the quoted ERDs on various makes of rim aren't always as quoted.
Hence the question. 🙂
Have you built one up coatesy?


 
Posted : 16/02/2015 7:57 pm
 gee
Posts: 0
Free Member
 

It's as printed.

At least, when I worked out spoke lengths based on the quoted ERD they were spot on.

GB


 
Posted : 16/02/2015 8:07 pm
Posts: 0
Free Member
 

Cant confirm the ERD, but they are nice rims. Lighter than Flow EXs (although not as wide).

These are mine.....

[img] [/img]

They have stood up to the worst of North Lakes sharp slate/rock very well ! 😀


 
Posted : 16/02/2015 10:51 pm
Posts: 507
Free Member
 

Not built those specific rims, but quite a few other Halo's,quoted ERD's always turn out fine.


 
Posted : 16/02/2015 11:49 pm
Posts: 4726
Full Member
Topic starter
 

Ok thanks, I have got a couple of measuring spokes somewhere buried, if I can find them I give them a quick once over if not I'll go with 557mm.
Cheers.


 
Posted : 17/02/2015 3:03 pm

6 DAYS LEFT
We are currently at 95% of our target!