Gluing tread to sol...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

Gluing tread to sole..

9 Posts
10 Users
0 Reactions
490 Views
Posts: 376
Full Member
Topic starter
 

My winter 45north boots the tread had come off the sole.

Can anyone recommend a decent glue for gluing it back on.


 
Posted : 29/01/2024 8:50 pm
Posts: 16346
Free Member
 

E6000, brilliant stuff done a few shoes now and put plenty of miles on them post gluing.


 
Posted : 29/01/2024 9:04 pm
Posts: 5164
Free Member
 

When the tread comes off soles it's never a good ending, usually means they need resoling, guessing the other one will be close to falling off as well, as it's usually lack of use that causes it, gluing them back is pretty much a short term fix unfortunately.


 
Posted : 29/01/2024 9:12 pm
Posts: 422
Full Member
 

Sikaflex 291 has to be the most sticky, sticky stuff I’ve ever used.. it’s brilliant and flexible to boot 😉


 
Posted : 29/01/2024 9:33 pm
Posts: 69
Free Member
 

If the uppers are in good condition it may be worth sending off to a pro like https://lancashiresportsrepairs.co.uk/ who will do proper job with a new Vibram sole.


 
Posted : 30/01/2024 7:09 am
Posts: 1154
Free Member
 

Contact adhesive because that's what's used to stick soles on in the first place. I've used EvoStik Impact to repair shoes and even do a full re-sole on my climbing shoes.


 
Posted : 30/01/2024 8:46 am
Posts: 6829
Full Member
 

Stormsure will work - the soles on my rubbish Keen boots started peeling off after a couple of months and have been stuck down well since.


 
Posted : 30/01/2024 5:22 pm
 nuke
Posts: 5763
Full Member
 

Been using Paistely shoe sole glue, the 'Strong' version (was on Amazon but seems to have disappeared now). Fixed various soles with it from Salomon, allstars, leather shoes, hiking, nikes...and all still intact. Used Stormsure successfully for a hole in some Aigle wellies


 
Posted : 30/01/2024 5:32 pm
Posts: 1324
Free Member
 

I'd like to find a good solution to this as f*ck me i've tried everything. Epoxy resin works well but cracks as it isn't flexible. Same with superglue. Contact adhesive just isn't strong enough, same with 'shoe glue'. They always pull apart on the inside where the ball of your foot is. Currently i'm trying to rescue a pair of Northwave winter boots that have a plastic sole and textile upper.


 
Posted : 30/01/2024 5:55 pm
Posts: 2701
Free Member
 

@temudgin “it’s brilliant and flexible to boot 😉” - very good!!


 
Posted : 30/01/2024 6:19 pm

6 DAYS LEFT
We are currently at 95% of our target!