Formula Hubs - as n...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Formula Hubs - as noisy as Hope !

6 Posts
3 Users
0 Reactions
574 Views
Posts: 17187
Full Member
Topic starter
 

Was out on my CDF30 yesterday having been using the summer road bike in preference since the Spring. Jeez, that freehub is noisy - resonates down the country lanes as loud as the Pro 2 on the HT 🙂

At least I didn't miss not having a bell ....

Wonder if I can quieten it down ? Its a sealed freehub and pretty new, having only see around 700 miles.


 
Posted : 14/09/2015 9:30 am
Posts: 10539
Full Member
 

Pack it with grease.


 
Posted : 14/09/2015 9:37 am
Posts: 17187
Full Member
Topic starter
 

what the freehub ? I thought the Formula ones were pretty much a sealed unit - fit and forget, replace when the pauls go ?


 
Posted : 14/09/2015 9:47 am
Posts: 65918
Free Member
 

Formula do allsorts, mostly you see the cheap rubbish barely sealed cup-n-cones but there's good ones too. I had some nice cartridge bearing ones in my cross bike. Which were completely silent actually and span forever, but maybe these are yet another


 
Posted : 14/09/2015 9:54 am
Posts: 17187
Full Member
Topic starter
 

thanks, these are described as 'Formula CL-92/CL-14251 Sealed Bearing'

I reckon they are quite full of grease as freehub was a bit draggy first few rides when backpedalling (others with CDF30 found same on here I remember)


 
Posted : 14/09/2015 10:04 am
Posts: 10539
Full Member
 

It's not the bearings that're making the noise, it's the ratchet on the freehub echoing loudly on the thin aluminium hub. Additional (thin) grease will quiet the resonance.

I speak from experience with Hope singlespeed hubs.


 
Posted : 14/09/2015 10:18 am
Posts: 17187
Full Member
Topic starter
 

Thanks Daffy - will have a look at it tonight, cheers


 
Posted : 14/09/2015 10:20 am

6 DAYS LEFT
We are currently at 95% of our target!