Exposure Maxx-d not...
 

[Closed] Exposure Maxx-d not retaining charge?

5 Posts
5 Users
0 Reactions
40 Views
Posts: 43056
Full Member
Topic starter
 

Maybe someone else has noticed this and can tell me if it's normal...

My Maxx-D Mk11 loses about 30% of its charge if left for a week unused after being fully charged. I'm going to try some deeper analysis of it but I don't think modern batteries should be as lossy as this.

I know Exposure have a good after-sales reputation so I'll be hoping to hear from them next week too.

 
Posted : 29/06/2019 10:22 am
Posts: 0
Free Member
 

Leave it on charge for several days.
That sorted my Diablo.

 
Posted : 29/06/2019 12:13 pm
Posts: 137
Full Member
 

I had a similar problem which turned out to be the "smart charging" feature was being activated if I switched the charger off before unplugging the cable from the light. Disconnecting the cable from the light before switching the charger off solved it. Alternatively switch the light on and off after charging clears it.

 
Posted : 29/06/2019 12:16 pm
Posts: 43056
Full Member
Topic starter
 

I had a similar problem which turned out to be the “smart charging” feature was being activated if I switched the charger off before unplugging the cable from the light.

That's interesting. Mine seems to default back to Mode 1 after every charge too. I'll try your suggestion of unplugging before switching off.

 
Posted : 29/06/2019 12:26 pm
 Del
Posts: 8202
Full Member
 

Don't store it fully charged, it's not conducive to long life for li-ion batteries. Store in a cool place partly charged.
Edit - also the exposure units don't charge to 100% unless you switch the charger on before you plug it in.

 
Posted : 29/06/2019 5:50 pm
Posts: 535
Full Member
 

Spoke to Exposure the other day regarding this. Was told to unplug light from charger before turning off mains power. They also had no problem with me leaving light fully charged.

 
Posted : 30/06/2019 1:20 pm